IID Pro MV License - D3, D4 & RRS - Enabling, Updates, D4 & RRS Timed / Remote Climate, D4 Bluetooth fitting
PM me for details
Owner of the original "Beanie" grille
D4 & RRS style D3 grilles made to order
6th Jan 2014 9:53 pm
Cellerdweller
Member Since: 05 Oct 2012
Location: Macclesfield
Posts: 1315
Jdb thats another 24mm deeper i bet thats snug .are the other dimensions the same or similar ?You're not afraid of the dark are you ?
6th Jan 2014 9:58 pm
Cellerdweller
Member Since: 05 Oct 2012
Location: Macclesfield
Posts: 1315
beanie wrote:
Get a move on and I'll bring you mine
i better get the spanners spinning then You're not afraid of the dark are you ?
6th Jan 2014 10:02 pm
JDB
Member Since: 25 Mar 2010
Location: NW Hampshire
Posts: 2486
Cellerdweller wrote:
Jdb thats another 24mm deeper i bet thats snug .are the other dimensions the same or similar ?
Rest are about the same! It won't fit with a hidden winch mount though as it is proud of the chassis/bumper mounts (will have one for sale shortly......)
The Allisport web page gives the dimensions of their one I recall - useful for a sanity check, I needed to make sure the dessicator on the AC was out of the way to get it in, the power steering cooler means it can't be fitted high in my case. Lower mount will continue to act as a tea strainer in water (no change over OEM) but at least its a little more open and possible to hose out.
I intend as I believe DM is, to suspend it I front wite the pipe outlets in roughly the same place as OE, just sitting forward to clear the chassis rails, so tucked in behind the steel bumper member Altox GSM FBH controller thread
IID Pro MV License - D3, D4 & RRS - Enabling, Updates, D4 & RRS Timed / Remote Climate, D4 Bluetooth fitting
PM me for details
Owner of the original "Beanie" grille
D4 & RRS style D3 grilles made to order
Last edited by beanie on 7th Jan 2014 9:53 pm. Edited 1 time in total
6th Jan 2014 10:47 pm
Cellerdweller
Member Since: 05 Oct 2012
Location: Macclesfield
Posts: 1315
Right thats the cooler ordered ! God this forum costs me You're not afraid of the dark are you ?
Yep Charles Allisport make then as a direct fit so no mods to be done, brackets are on the IC to fitt behind the steel bumper bar and you get spacer shims for the other bumper bolts
I understand that only the off road IC can be used with a hidden winch , not sure about a bumper mount winch Altox GSM FBH controller thread
IID Pro MV License - D3, D4 & RRS - Enabling, Updates, D4 & RRS Timed / Remote Climate, D4 Bluetooth fitting
PM me for details
Owner of the original "Beanie" grille
D4 & RRS style D3 grilles made to order
7th Jan 2014 10:51 pm
Disco_Mikey
Member Since: 29 May 2007
Location: Dundee, Scotland
Posts: 20831
beanie wrote:
Yep Charles Allisport make then as a direct fit so no mods to be done, brackets are on the IC to fitt behind the steel bumper bar and you get spacer shims for the other bumper bolts
Last edited by Disco_Mikey on 9th Jan 2014 9:50 pm. Edited 1 time in total
8th Jan 2014 6:42 am
Cellerdweller
Member Since: 05 Oct 2012
Location: Macclesfield
Posts: 1315
guess what poastie dropped off today ? Now gents do we reckon fit it as is with silicone reducers or cut the outlets off and weld some on the same size as the standard d3 hoses (whatever size that is, not measured it yet .) That way there are less hoses and clamps . Mikey i must agree it does feel and look very substantial You're not afraid of the dark are you ?
8th Jan 2014 6:28 pm
JDB
Member Since: 25 Mar 2010
Location: NW Hampshire
Posts: 2486
Member Since: 05 Oct 2012
Location: Macclesfield
Posts: 1315
Jdb you is the man
Perfect, I can picture it now however I've just asked in another post do you know the size of the standard intercooler inlet / outlet pipes You're not afraid of the dark are you ?
9th Jan 2014 9:14 pm
JDB
Member Since: 25 Mar 2010
Location: NW Hampshire
Posts: 2486
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
i bet thats snug .are the other dimensions the same or similar ?
however I've just asked in another post do you know the size of the standard intercooler inlet / outlet pipes 
