kiwidis3
Member Since: 24 Oct 2012
Location: Newman
Posts: 28
  
|
Hey all, just wondering about the OE compressor from paddock spares. Any good for the D3 supension? If anyone thinks there's something better shout out please. The OE model seems good value
Ok cheers
|
 20th May 2013 4:54 am |
|
|
LeighW
D3 Decade
Member Since: 31 Jan 2006
Location: Brisbane, AUS
Posts: 920
|
kiwidis3 wrote:Hey all, just wondering about the OE compressor from paddock spares. Any good for the D3 supension? If anyone thinks there's something better shout out please. The OE model seems good value
Ok cheers
Mikes, the model listed is for the D3 from their website so should be suitable. However, if you do go the route of the new compressor wouldn't it be cheaper through TLO (where you got the rebuild kit)?
Paddock Spares (and Island 4x4) show PN LR023964 (appears to be the AMK version) at about AUD$510 PLUS freight to Australia so it might be prudent to check what price TLO's comes in at.
I am about to explore the same avenue when my engine change is done... (mucho dollars  ) LeighW
The old girl is on her third engine...
* first ran a bearing (design failure in original engine)
* second had a failure of the water outlet on top of the engine (pls check yours)
|
| 21st May 2013 2:39 am |
|
|
Ivan
Member Since: 01 Mar 2011
Location: Malvern Worcestershire
Posts: 692
|
I ordered one from Paddocks and it was the genuine part not a copy.
HTH
Ivan 2013 RR Vogue SE SDV8
2013 Freelander 2 HSE Luxury SD4
|
| 22nd May 2013 4:41 am |
|
|
kiwidis3
Member Since: 24 Oct 2012
Location: Newman
Posts: 28
|
Righto cheers fellas, yeah I'll send TLO an email and see what he can offer.
|
| 23rd May 2013 4:10 am |
|
|
|
|
kiwidis3
Member Since: 24 Oct 2012
Location: Newman
Posts: 28
|
Yeah cheers joneys. I see that I'll have find out how compatible that compressor would be for the d3. This suspension drama is doing my head in. Anyway I'll get it sorted.
|
| 27th May 2013 2:28 pm |
|
|
kiwidis3
Member Since: 24 Oct 2012
Location: Newman
Posts: 28
|
so I had the d3 in the shop finally today, down in the city for a few days. Fit the latest AMK compressor. Went and tested it before driving off into the sunset with a smile and what do you know, DING suspension fault comes up. I'm getting bloody ropeable with this car. ahhhhhhhh. So brought it back and showed them, cleared it then tested again and got another fault. Cleared then got another fault to come up and plugged into the computer for the third time and each time 3 different faults appeared. First was air leak in line, second was compressor was slow to rise, and the third was the compressor was too rapid to fill.
Mechanics were confused which didn't help the cause. We talked it out a bit and made a decision that common factor was air pressure. He suggested the next possible thing was to replace the "TRANSFER VALVE" I think its called or "TRANSFER RELIEF VALVE". I'm out of time to stick around in perth (back to the pilbara) so no time to get it done, because WA as usually have none in stock and need to order from east coast.
I'm having difficulty finding any info this part on this site or others. Can anyone point me in the right direction please?
Any ideas would be appreciated thanks
Mikes
|
| 24th Jun 2013 10:52 am |
|
|
garrycol
Member Since: 06 Dec 2010
Location: Canberra
Posts: 1130
|
Did they load the new software version that is needed to work the new compressor?
Garry
|
| 24th Jun 2013 11:49 am |
|
|
kiwidis3
Member Since: 24 Oct 2012
Location: Newman
Posts: 28
|
yep
|
| 24th Jun 2013 1:43 pm |
|
|
