Sparrowhawk
Member Since: 15 Jul 2012
Location: mid sussex
Posts: 12
  
|
Hi,
Can anyone tell me, is it possible/practical to change upper/lower steering ball joints in-situ rather than having to take off wishbones and then having to have the wheel alignment re checked?
If it is possible, is there a thred on here somewhere explaining how?
Thanks in advance.......
|
 23rd Mar 2013 8:41 pm |
|
|
|
|
Sparrowhawk
Member Since: 15 Jul 2012
Location: mid sussex
Posts: 12
|
Cheers D&D, that's the lower one sorted, ta.
|
| 23rd Mar 2013 8:59 pm |
|
|
Sparrowhawk
Member Since: 15 Jul 2012
Location: mid sussex
Posts: 12
|
Anyone got any info on the top ones?
|
| 23rd Mar 2013 9:21 pm |
|
|
|
|
ronaldo
Member Since: 22 Apr 2013
Location: london
Posts: 5
|
After removing the wheels Remove the cotter pin from the ball joint and separate the ball joint from the knuckle and then press the new ball joint into the control arm and then install the steering knuckle back on the ball joint assembly. this is the way to replace the ball joint if you do not understand just go to garage and change it . mechanic brisbane
|
| 23rd Apr 2013 5:45 am |
|
|
