Hello I beg your forgiveness for my English - it autotranslation. I have the same problem faced by you and come out the winner! I need your help! I installed on my Disco Hsie hybrid TV L322 but the main unit is not on the menu and you can not use it! About grief! Which way you were going and what, and how do you get to see the product pictures on your TV monitor brain?http://lr-club.com/uploads/post-10103-1370960477.jpg
11th Jun 2013 7:12 pm
wiggs
Member Since: 03 Sep 2006
Location: Manchester
Posts: 14372
It needs to be switched on in the car config fileG4 Gone ...but not forgotten
11th Jun 2013 7:19 pm
DJp
Member Since: 27 Dec 2010
Location: Russia
Posts: 8
Hello I understand that. The question is how?! I have JLR Mongoose for Jaguar and Land Rover V131 http://www.uobd2.com/wholesale/jlr-mongoos...over.html.
Point where to look. Having the ability to read your posts on this site folded an idea of you as a very experienced person searching for their solutions.
11th Jun 2013 10:13 pm
robbo770
Member Since: 29 Jan 2013
Location: Aberdeenshire
Posts: 2294
my car was operating on virgin softwware 2005 from the factory!!
once I had updated the software on the touchscreen it suddenly saw the new items properly and allowed control of them accordingly.
the CCF file need enabling regardless as wiggs has stated.
I bought my own Faultmate MSV extreme to allw me to do my own bits, I did enable the unit with an iiD tool first though, but the faultmate was what sorted it out for good!!.
can only recommend the real toys for the boys FFRR SC 4.2
Member Since: 27 Dec 2010
Location: Russia
Posts: 8
Hello Six days ago, I was doing my car diagnosis from a representative of the LR in my town and demanded to prescribe me this block in CCF but worker said they could not access?! And I was left with nothing. I've heard a lot about WHAT you need to watch and never - HOW?
12th Jun 2013 6:25 am
DJp
Member Since: 27 Dec 2010
Location: Russia
Posts: 8
Hello, I solved my problem with the TV. It was simple, but the most important thing to me has helped man (many thanks to him) with open access to the necessary functions for me. So the question of whether there is a third-party code generator to enter the engineering menu? And is it possible to get it?
16th Jun 2013 6:32 pm
robbo770
Member Since: 29 Jan 2013
Location: Aberdeenshire
Posts: 2294
Found this on Ebay!!, for those looking for the genuine ones with the wiring even on them too!!!
Member Since: 29 Jan 2013
Location: Aberdeenshire
Posts: 2294
Well with much international searching I have sourced a dual channel infra read transmitter which matches the 2006-2008 wireless headphones I have which I bought for my FFRR SC.
so the good news on test is it matches both the frequencies programmed into the headphones!!
so here is what the unit looks like,
headphones
[URL=]
Click image to enlarge
[/URL]
so with a shielded 10 core cable I will be able to take the output from the amp under the drivers seat up to the roof and with a bit of tinkering blend this into the rear roof console!!.
with upload images as it progress. :thumbsup:
Admin note: this post has had its images recovered from a money grabbing photo hosting site and reinstated FFRR SC 4.2
Member Since: 29 Jan 2013
Location: Aberdeenshire
Posts: 2294
Well made a break through, found a Scottish dealer who has the unit in stock in latest version as well, so now working to see how to integrate into the overhead console for Factory fit look to then power up
dealer is working out a Disco 3 / 4 forum price delivered in the UK and I will let you guys know, the loom wiring I am working on to see if a plug and play is available.....
Member Since: 29 Jan 2013
Location: Aberdeenshire
Posts: 2294
SZo got some wiring done today for the dual channel transmitter,
from the flebay got 2 off 3mtr RCA - 3.5mm jack leads
this allowed me to feed the cables taped parallel together with a single for the remote power feed for the unit from the roof down the b pillar.
There is not much room at all because of the curtain airbags, but got it in and half way down the pillar is a big grommet, well there was as the cables all feed into the pillar here and come nicely out the bottom.
here is the cables run and then pulled through the notorious cable run under the drivers rear carpet area, where basically all car wiring seems to meet!!!!
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
And I was left with nothing. I've heard a lot about WHAT you need to watch and never - HOW? 
[/URL][/u]
