Member Since: 15 Nov 2013
Location: wasserburg am inn
Posts: 90
got mine today!
dhl was really fast! in two days from cyprus to germany!!
just registered on nanocom-diagnostics but how long does it take to receive the email with username/pwd?
martin
12th Dec 2013 6:05 pm
crwoody
Member Since: 09 Mar 2009
Location: Littleborough
Posts: 2109
[quote="BBS SPY"]
Quote:
... Also note that anyone getting CAN BUS vehicle equipment will also get an SD card.
This is pre formated and pre loaded with a folder that contains all the secondary boot loader files that are required for writing CCF's
I hope this helps
ATB
Colin
Hi Colin, I noted the SD card and had a quick look at it's contents with the Nanocom plugged into the PC via USB cable, there were 2 folders - BBS, SBL and then a 3rd - NCRF which got added during the S'ware upgrade, however when I try to view the SD contents from the Nanocom file manager it doesn't recognise the folders, likewise when I downloaded a modified CCF file from the Genesis site, I put the extracted two files onto the root of the drive, connected to the car and tried to flash an ECU but after selecting the "INFO.ENC" file, it displayed "File system error - SBL folder not found".
In a attempt to resolve this, I took a spare 32mb SD card, re-formatted it to FAT (with a dedicated SD format utility) and copied the two Genesis files to it and the complete SBL folder, all with the card in the PC, back in the Nanocom, the file manager would still not recognise the folder. I put the card back in the PC and deleted the SBL folder, then put it back in the Nanocom and used the "new folder" function to create the SBL folder directly from there, then copied the folder contents from the original card into it, Lo and behold the folder and all it's files are now visible.
I then went back to flash the ECU, to enable sat-nav on the move, it went through all the stages and said it was successful but took only a minute or so which made me suspicious, on checking it still has not enabled it, maybe I need to try again?
Anyway, my question is - should the Info.enc and xxx.vbf files from Genesis be placed in the root of the SD card or in a specific folder?
Also why can't the Nanocom see the folders on the original SD card?Clive
12th Dec 2013 6:07 pm
karpouzih Site Sponsor
Member Since: 02 Feb 2013
Location: Lemesos
Posts: 150
HI Eljot,
Could you p.m. the email address you used to register? The email is automatically generated. Check your spam folder? If not ill jump on the database and check your registration went through.
Crwoody
There is a lot of info on the SD cards / files folders etc on the Nanocom site. Your card does seem to have behaved strangely based on what you've said, ill give you that.
Ive uploaded a post on the Nanocom website under General Software for now, give it a mull over.
Furthermore the dedicated forums offer much more info and support if needed.
Same situation here regarding CCF editing and the INFO/SBL FolderSi
2016 Disco 4 SE Tech
2019 Fiesta ST3
2021 GBS Zero
12th Dec 2013 6:25 pm
chadders
Member Since: 07 Mar 2010
Location: Aberdeenshire
Posts: 40
Mine arrived today, DHL were very quick.
Working offshore, so won't get to play with it until January
12th Dec 2013 7:13 pm
chadders
Member Since: 07 Mar 2010
Location: Aberdeenshire
Posts: 40
Mine arrived today, DHL were very quick.
Working offshore, so won't get to play with it until January
12th Dec 2013 7:13 pm
tank
Member Since: 29 Oct 2012
Location: Hexham
Posts: 101
BBS sneaky beggers...
Mine arrived today, not a clue it had been shipped until the courier rang.
Probably the best surprise I will get this year.
BBS thanks for all your efforts.
Now how does this thing work
12th Dec 2013 7:52 pm
karpouzih Site Sponsor
Member Since: 02 Feb 2013
Location: Lemesos
Posts: 150
tank, at least it was a nice surprise i hope.
how to use in 3 easy steps.
1)Throw manual and all available "how to use info" over your shoulder in true man fashion.
2)Plug it in.
3)Retrieve manual and info and read through it to register the unit and use it properly
Enjoy
Chris
12th Dec 2013 7:58 pm
tank
Member Since: 29 Oct 2012
Location: Hexham
Posts: 101
Chris,
Steps should read:
3 Refuse to retrive manual repeatably saying " I'm sure I can figure it out... How hard can it be?"
4 RTFM
IID Pro MV License - D3, D4 & RRS - Enabling, Updates, D4 & RRS Timed / Remote Climate, D4 Bluetooth fitting
PM me for details
Owner of the original "Beanie" grille
D4 & RRS style D3 grilles made to order
12th Dec 2013 8:08 pm
karpouzih Site Sponsor
Member Since: 02 Feb 2013
Location: Lemesos
Posts: 150
tank wrote:
4 RTFM
You said it not me
12th Dec 2013 8:11 pm
tank
Member Since: 29 Oct 2012
Location: Hexham
Posts: 101
Said it but will never admit to doing it
12th Dec 2013 9:23 pm
Dave^
Member Since: 23 Jun 2013
Location: West Yorks
Posts: 706
F355GTS wrote:
DHL are giving mine a nice tour on the way here
Click image to enlarge
If that was Yodel, the number of pieces would increase exponentially with each tag... flickr
12th Dec 2013 9:29 pm
eljot
Member Since: 15 Nov 2013
Location: wasserburg am inn
Posts: 90
just to say "thank you" to chris, colin and all their colleagues who did an amazing job just to provide us with a nice toy right before christmas!
already updated the latest firmware!
but one question:
i own one of the first nanocom for my td5 which works still fine. okay, some problems with "connecting the ecu", etc. but is doing the job.
now with the nanocom evo, does it have the same funktions as the "old" nanocom? would mean that i can sell the old one, get a license key for the td5 and can use the evo?
thx, martin
12th Dec 2013 9:44 pm
Alan B
Member Since: 12 Feb 2013
Location: Fife
Posts: 6528
Eljot, yes you just need another licence to be able to do a
D3 and a D2
That's what I bought mine for, to do both and Colin reassured me it will work
Get it while the discount is still on though
D3 57 xs Stornaway grey
D2 02 commercial silver gone but a great servant and won't be forgotten
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum