my near side zenon headlight stays on full beam after dip has been selected... with my son behind the wheel flashing the lights it looks like some "cover" or something seems to stick. The halogen high beam works fine. (not adpative!) sometimes it sorts itself out other times i need to switch off the lights and engine and start again... oncoming drivers are getting seriously peed off.... is this another trip to the dealer???i'm lovin it....
21st Jan 2007 8:14 pm
DG Site Moderator
Member Since: 12 Dec 2005
Location: The Gaff
Posts: 50979
check the wiring loom socket connector is firmly in place..but its sounds as though you may have a fault on the shutter TBH21 year LR veteran > D2 GS 2003 > D3 S 2006 > D3 HSE 2009 > D4 HSE 2013 > D4 HSE 2015 > D5 HSE 2018 > DS HSE R-Dynamic P300e 2021
21st Jan 2007 8:17 pm
AndrewS Tarquin of the Desert
Member Since: 06 May 2005
Location: Y...... because I can
Posts: 10442
Take it to your dealer Thats what they are there for. In the Beginning there was nothing, which exploded.
As I'm sure you know, the xenon high/low beam is functioned by the way of a shutter portioning off part of the beam.
It is obvious that the shutter is sticking sometimes and if you want to avoid a visit to the dealer, (foolish IMO if it's under warranty) then you will have to take it apart and find out what's causing it!
Do you want to do that?
Take it to the bloody dealer!
Then they can fill in the feedback form which will help others in the long run!
Sorry to be so arsey but you don't pay £30K+ to pi$$ about like this! Back in the game!
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum