Member Since: 19 Jul 2011
Location: Oslo
Posts: 69
Vibration
Sorry if this has been asked before:
I just changed for new winter tires, expecting vibrations to go away. There is no more vibrations through the steering wheel, but there is still vibrations that come in all but the lowest speeds and through all gears. Feels like my old D1 when it needed new propshaft joints. It's got 150 K km and never replaced wheel bearings or drive train, just suspension bushes (rear upper arm) and steering rods.
As the UJs on propshafts are different than what I'm used to from older Land Rovers, I am asking for advice on how to locate the source of vibrations.1951 Series One 80" 1600cc Deep Bronze Green
2007 Discovery 3 TDV6 HSE Tonga Green
10th Oct 2012 1:34 pm
marco 110
Member Since: 15 Nov 2009
Location: SALLES 33
Posts: 1014
Hello
Check wheel bearings .
Jack the car up , and one hand on top of the wheel , other hand on down , push and pull the wheel..
Member Since: 19 Jul 2011
Location: Oslo
Posts: 69
Thank you. Will I be able to feel freeplay in the propshaft joints, or the center bearing?1951 Series One 80" 1600cc Deep Bronze Green
2007 Discovery 3 TDV6 HSE Tonga Green
10th Oct 2012 7:20 pm
marco 110
Member Since: 15 Nov 2009
Location: SALLES 33
Posts: 1014
Check both, but Pay close attention at the center bearing ............ Marco.
-D4 sdv6 HSE 2012 , high beam assist , surround cam, tv , and a lot of nice stuff..
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum