Member Since: 20 Oct 2011
Location: Cape Town
Posts: 1
Replacing glow plugs om 2006 TDV6 HSE?
My LR3 is taking long to start first time in the morning. Have to turn over up to 5 times before she starts. I am trying to understand what causes this; faulty glow plugs or loss of fuel pressure when she is stationary.
Any advise please.
Paul.
11th Oct 2012 9:16 am
aljo
Member Since: 20 May 2007
Location: west sussex
Posts: 804
Best get any fault codes read first Last night I lay in bed looking up at the stars in the sky and I thought to myself, where,s the f**king ceiling!!
11th Oct 2012 10:15 am
Tawny Owl
Member Since: 22 Oct 2008
Location: Here and there
Posts: 1645
To check individual glow plugs first go to the 3 pin multiplug on each bank under the engine cover. One bank has a black plug and the other bank has a brown plug. If you disconnect these multiplugs and supply a fused feed to each pin going down to the plugs whilst using an amp clamp , you will see how much each plug is working at , I think it's around 15amps.
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum