Member Since: 01 Dec 2011
Location: cornwall
Posts: 10146
sat nav and amp auto lec
ok chaps , took d3 down to auto lec this morning , nothing showing on fuse 58 but fuse tested and ok ,but when a tester probe was put on fuse in situ satnav came on and sound from amp , he said its working from the resistance , the risistance was 1449oms so wat the does that mean -------------------------------------------------
if you cant hold on dont let go , it ill come in handy for something even if you never use it.
D3 SE 05,
110 s wagon 300 tdi SOLD
h top transit
crew cab transit
transit connect
ausa dumper, muck truck .
peljob 2.5 digger
06 L 200 crew cab
28th Sep 2012 10:17 am
wiggs
Member Since: 03 Sep 2006
Location: Manchester
Posts: 14372
sounds like the fuse or the fuse holder .
if hes putting his meter across the terminals ...sounds like his probe is making the circuitG4 Gone ...but not forgotten
28th Sep 2012 10:30 am
stew 46
Member Since: 01 Dec 2011
Location: cornwall
Posts: 10146
he,s tester connects to battery with long lead and got point other end that he touched the fuse with , he said its turning on from the resistance of the tester ,he thinks could be a module or an ecu he thought it was when he pushed fuse but he done this without tester nothing again ,only comes on with tester on it -------------------------------------------------
if you cant hold on dont let go , it ill come in handy for something even if you never use it.
D3 SE 05,
110 s wagon 300 tdi SOLD
h top transit
crew cab transit
transit connect
ausa dumper, muck truck .
peljob 2.5 digger
06 L 200 crew cab
28th Sep 2012 10:40 am
wiggs
Member Since: 03 Sep 2006
Location: Manchester
Posts: 14372
did he check fuseable link 18 e in battery fuse box ...that supplies the power to fuse 58
no good looking to see if its blown ...you need to do a continuity test across the 2 terminalsG4 Gone ...but not forgotten
28th Sep 2012 10:46 am
stew 46
Member Since: 01 Dec 2011
Location: cornwall
Posts: 10146
not sure what one that is as all R, F or FL-------------------------------------------------
if you cant hold on dont let go , it ill come in handy for something even if you never use it.
D3 SE 05,
110 s wagon 300 tdi SOLD
h top transit
crew cab transit
transit connect
ausa dumper, muck truck .
peljob 2.5 digger
06 L 200 crew cab
28th Sep 2012 10:50 am
stew 46
Member Since: 01 Dec 2011
Location: cornwall
Posts: 10146
would that be fl 18-------------------------------------------------
if you cant hold on dont let go , it ill come in handy for something even if you never use it.
D3 SE 05,
110 s wagon 300 tdi SOLD
h top transit
crew cab transit
transit connect
ausa dumper, muck truck .
peljob 2.5 digger
06 L 200 crew cab
28th Sep 2012 10:52 am
stew 46
Member Since: 01 Dec 2011
Location: cornwall
Posts: 10146
ok wiggs thanks ,going back down at 1 pm -------------------------------------------------
if you cant hold on dont let go , it ill come in handy for something even if you never use it.
D3 SE 05,
110 s wagon 300 tdi SOLD
h top transit
crew cab transit
transit connect
ausa dumper, muck truck .
peljob 2.5 digger
06 L 200 crew cab
28th Sep 2012 10:57 am
wiggs
Member Since: 03 Sep 2006
Location: Manchester
Posts: 14372
looks like this
just looking at top is no good ..pull it out and check continuity .
if its alright ..then its a pig to get the fuse box out to check the underside ...i would run another live to fuse 58 ...be a lot quicker .G4 Gone ...but not forgotten
28th Sep 2012 11:05 am
stew 46
Member Since: 01 Dec 2011
Location: cornwall
Posts: 10146
thanks wiggs ill tell him -------------------------------------------------
if you cant hold on dont let go , it ill come in handy for something even if you never use it.
D3 SE 05,
110 s wagon 300 tdi SOLD
h top transit
crew cab transit
transit connect
ausa dumper, muck truck .
peljob 2.5 digger
06 L 200 crew cab
28th Sep 2012 11:18 am
Disco_Mikey
Member Since: 29 May 2007
Location: Dundee, Scotland
Posts: 20788
It sounds like he is using a power probe, and sticking 12v into the circuit, which is powering everything up
Sounds like a connector has been left unplugged, or the terminal has been pushed out of the connector, or even a trapped wire, but I can't think what one you would have affected when lifting the body off...My D3 Build Thread
Member Since: 01 Dec 2011
Location: cornwall
Posts: 10146
im back down there at in 20 mins so ill tell all info mikey atleast satnav and amp are not blown -------------------------------------------------
if you cant hold on dont let go , it ill come in handy for something even if you never use it.
D3 SE 05,
110 s wagon 300 tdi SOLD
h top transit
crew cab transit
transit connect
ausa dumper, muck truck .
peljob 2.5 digger
06 L 200 crew cab
28th Sep 2012 12:46 pm
wiggs
Member Since: 03 Sep 2006
Location: Manchester
Posts: 14372
might of blown it when he put the battery on the wrong way G4 Gone ...but not forgotten
28th Sep 2012 12:47 pm
stew 46
Member Since: 01 Dec 2011
Location: cornwall
Posts: 10146
yea thats what we were thinking ,there was a sound like a light bulb blowing when it happened
off now update asap thanks chaps -------------------------------------------------
if you cant hold on dont let go , it ill come in handy for something even if you never use it.
D3 SE 05,
110 s wagon 300 tdi SOLD
h top transit
crew cab transit
transit connect
ausa dumper, muck truck .
peljob 2.5 digger
06 L 200 crew cab
28th Sep 2012 12:54 pm
stew 46
Member Since: 01 Dec 2011
Location: cornwall
Posts: 10146
ok chaps , the fuse link 18 is ok , intermitant live to fuse No 58 , he thinks something blown on sercut board behind fuse box in glove box ,so he made an in line fuse link ,and taken it from a live feed until i can get it sorted so now got satnav and amp all for £20.00 -------------------------------------------------
if you cant hold on dont let go , it ill come in handy for something even if you never use it.
D3 SE 05,
110 s wagon 300 tdi SOLD
h top transit
crew cab transit
transit connect
ausa dumper, muck truck .
peljob 2.5 digger
06 L 200 crew cab
28th Sep 2012 2:11 pm
wiggs
Member Since: 03 Sep 2006
Location: Manchester
Posts: 14372
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
so wat the 
does that mean 
he thought it was when he pushed fuse but he done this without tester nothing again ,only comes on with tester on it 
