Member Since: 19 May 2012
Location: Malawi
Posts: 12
Rear Number Plate Fittment on MY 12 HSE
Trying to get local plates fitted to my new wheels since it arrived from the UK and after removing the rear UK export registration plates which were stuck on with double sided tape i noticed that there are two hexagonal holes in the tailgate (presently covered up with gaffer tape) but there aren't any captive nuts in there. I suppose could dismantle the trim panel and put a nut and bolt through from behind but I was wondering if these hexagonal holes were some sort of standard fitment and whether or not it would be possible to find some fixings that press into these holes form the outside that I could then screw into??
I know i should have asked at the dealer in London but forgot in the excitement of taking delivery of my baby!
The thing is over here local regulations state that a number plate needs to be rivited onto the body of the vehcile or alternatively rivited onto a holder which is affixed permanantly to vehcile and not with double sided tape. Hence i want to use these holes rather than drilling new holes for rivets and then running the risk of rust in the long term.
27th Sep 2012 10:29 am
B16 KJR
Member Since: 10 Jul 2006
Location: Rosyth, Fife
Posts: 3005
You can get plastic "plugs" with a square fitting at the back which pushes into the hole on the tailgate and is designed to accept a screw from the front and acts a bit like a rawlplug
27th Sep 2012 10:57 am
Hairy Dan
Member Since: 19 Jan 2011
Location: Co. Durham
Posts: 12319
Microcat lists a number plate mount with 2 self tapping screws and nuts for non UK markets you can see them in this image
Click image to enlarge
Cheers Ian
--------------------
Club N.E.R.D.S
Kielder 4x4 Safari
Discoless
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
