Member Since: 10 Mar 2010
Location: Wantage
Posts: 559
3/4 of the split charge now done. Cant do any more today as I should of ordered Micro piggy back fuse holder and not the standard size. Then all I have to do is work out a route to get a cable to feed into the glove box area...... Any suggestions appreciated!
30th Sep 2012 3:42 pm
Andyred90
Member Since: 10 Mar 2010
Location: Wantage
Posts: 559
Micro piggyback fuse has arrived but is there a simple route from the N/S engine bay into the glove box area?
3rd Oct 2012 6:43 pm
blue meanie D3 Decade
Member Since: 04 Aug 2005
Location: Newbury
Posts: 6861
I don't know the X charge system Andy but can you not take a feed from the fusebox in the battery box?and theeeeennn......???
3rd Oct 2012 8:54 pm
Andyred90
Member Since: 10 Mar 2010
Location: Wantage
Posts: 559
Thats what I plan to do to feed the x charge relay but the reason I want to know where I can run a cable into the glove box area is to send a wire from the auxiliary battery into the area to provide an independent power supply to the 12V sockets.
As I do a fair bit of Radio Marshaling I dont want to drain the main starter battery leaving myself stuck on a wet welsh hillside
3rd Oct 2012 10:06 pm
blue meanie D3 Decade
Member Since: 04 Aug 2005
Location: Newbury
Posts: 6861
there's a grommet in the bulkhead on the driver's side behind the second battery, some good pics in Nighthawk's gallery,
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum