dangermousehouse
Member Since: 20 Oct 2010
Location: Tewantin
Posts: 27
  
|
Just started getting 'ye olde' C1A20 fault registering in my 2005 Disco.
My service history shows that the previous owner had the compressor replaced about 2 years ago, so I'm kinda hoping that it isn't time for another one.
I've read a bit about suction filters and dryers etc, but was wondering if there was a drawing showing the arrangement etc.
Are these things easy to replace? Does anyone have the part numbers to hand.
Any help and advice appreciated.
Cheers
|
 9th Aug 2012 10:00 am |
|
|
Flack
Member Since: 06 Sep 2006
Location: Preston Lancashire
Posts: 6308
 
|
About 1 hour to replace if fitting a new one and all the bolts come out along with the pipes, you can get an overhaul kit for around £20.00 and then you need to replace the silica gel in the air dryer. It might just be ok after this. But check your bulbs and your brake light switch as well as these can throw up this error.
If you do go down the route of a replacement pump then make sure you get a new relay and update the software for the comp to the latest version.
Flack 
|
| 9th Aug 2012 5:02 pm |
|
|
