leeburn
Member Since: 26 Jul 2012
Location: co durham
Posts: 61
 
|
I'm putting a private plate on my recently purchased disco 3 and i'm wanting to get away from the usual square plate. Wanting to keep the registration all on one line. Has anyone done this? The legal size seems just to big for this. Does anyone know where a slightly smaller with plate can be bought and are they still legal? Ta
|
 4th Aug 2012 6:34 pm |
|
|
leeburn
Member Since: 26 Jul 2012
Location: co durham
Posts: 61
|
I'm sorted now folks, found a plate maker who does plates in a 16" x 4.5" and have ordered one.
This should fit on the back and look pretty good hopefully. Hopefully the size wont upset the bizzies to much to much either!
|
| 5th Aug 2012 12:40 pm |
|
|
Narpy
Member Since: 18 Jul 2011
Location: Stockport
Posts: 7830
 
|
Yes, I've done this.
I've got a five digit number plate and it looks fine as a single line with legal size font, on a 14 x 7 plate with a GB logo on the left side.
The problem you'll have, with a 16 inch plate, is the tailgate handle lamps wont illuminate a plate that is that long.
It's a risky business tinkering with lettering and font size, spacing etc. but try to keep the font and size legal ( 75mm ) and you should be ok providing you don't get a particularly officious rozzer.
How many digits you got leeburn? Mods:
Front Fogs + Halos
FBH Remote Control
The 1st Ever RRS Modded Grill
Garmin Nuvi + D4 Surround + Reversing Camera.
D4 Steering Wheel.
Rear Boot Spoiler.
Twin Brake Lights.
Wing Mirror Indicator Repeaters.
Long Roof Rails
Make your own Narpy grill thread
I'm not scared, I'm outta here.
|
| 5th Aug 2012 3:21 pm |
|
|
