Advertise on DISCO3.CO.UK
Forum · Gallery · Wiki · Shop · Sponsors
DISCO3.CO.UK > In Car Electronics (D3)

TV option
Post Reply  Down to end
Page 1 of 1
kevinreeves
 


Member Since: 18 Dec 2011
Location: Windsor
Posts: 262

United Kingdom 2005 Discovery 3 TDV6 HSE Auto Bonatti GreyDiscovery 3
TV option

Hi all, another question i have,
I wondered what hardware /software is required to enable the wife to watch TV in the car, is it a case of fitting a digital tuner in the boot and then a case of software upgrade?
Thanks
  
Post #9628935th Aug 2012 11:49 pm
View user's profile Send private message View poster's gallery Reply with quote
wiggs
 


Member Since: 03 Sep 2006
Location: Manchester
Posts: 14372

United Kingdom 2015 Discovery 4 3.0 SDV6 HSE Auto Fuji WhiteDiscovery 4

You need

Tv tuner
4x antenna amps
2x antenna amp looms
1x coax from tuner to screen
1x tv tuner bracket

It would also need enabling
 G4 Gone ...but not forgotten  
Post #9629746th Aug 2012 10:28 am
View user's profile Send private message View poster's gallery Reply with quote
kevinreeves
 


Member Since: 18 Dec 2011
Location: Windsor
Posts: 262

United Kingdom 2005 Discovery 3 TDV6 HSE Auto Bonatti GreyDiscovery 3

Hi Wiggs - so how much do you estimate this would cost or should i go to TLO for prices on hardware and you for enabling only? cheers
  
Post #9632367th Aug 2012 12:06 am
View user's profile Send private message View poster's gallery Reply with quote
wiggs
 


Member Since: 03 Sep 2006
Location: Manchester
Posts: 14372

United Kingdom 2015 Discovery 4 3.0 SDV6 HSE Auto Fuji WhiteDiscovery 4

Approx £550
 G4 Gone ...but not forgotten  
Post #9633087th Aug 2012 10:17 am
View user's profile Send private message View poster's gallery Reply with quote
jamieg7762
 


Member Since: 05 Mar 2010
Location: Warwickshire
Posts: 1232

England 2013 Discovery 4 3.0 SDV6 HSE Auto Corris GreyDiscovery 4

It costs bout £240 for cables/amps + deliver.

Mine came in at about £850/900, that is with a tv on the move module or if you didn't go for that you can always go through the diagnostic screen to watch it, but you can not change channel with that.

If you do go OEM, you will need to remove the rear drivers side quarter panel, the roof lining at the back to install the amps and run the cables to the TV tuner.
The cable that runs from the tv tuner to the sat nav screen is a pain as it terminates at the gear box, you then have to get another one that runs to the sat nav screen.

One of the scariest jobs I did was to solder on the rear windows.

If you decide to go down this route, give me a shout as I have all the part numbers you need and can provide some guidance on routing the cables etc.
 d4 HSE in Corris Grey with Black options pack
D3 with the following
Alive Tuning EGR blanking kit
Alive Tuning Re-map
Alive Atrics console
Samco intercooler hoses (from Alive Tuning)
Alive Tuning De-Cat pipe, lovely tone!
Retrofit OEM Hybrid TV tuner 
 
Post #9633277th Aug 2012 11:28 am
View user's profile Send private message View poster's gallery Post Reply
Display posts from the last:  
Post Reply Back to top
Page 1 of 1
Jump to:  
Previous Topic | Next Topic >


Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



DISCO3.CO.UK Copyright © 2004-2024 Futuranet Ltd & Martin Lewis
DISCO3.CO.UK RSS Feed - All Forums

DISCO3.CO.UK is independent and not affiliated to Land Rover.
Switch to Mobile Site