toxxic
Member Since: 27 Jun 2011
Location: Saskatoon
Posts: 87
|
Hi!
Is there a dimmer wire near the dash board which I could splice my accessory simmer wire into so it dims out the LED of the accessory when car is not on. Land Rover LR3 SE v4.0
Matte Black Wrapped with Chrome Edging, Front Grille, Aftermarket Reversing Camera, Aftermarket Parking Sensors, Curt Class III Hitch,
|
6th Aug 2012 2:00 am |
|
|
BBS SPY
Site Sponsor
Member Since: 15 Jun 2007
Location: Sunny Cyprus
Posts: 3054
|
The Illumination level of all the dash components is controlled by an output from the Light Switch module that has the dimmer on it. It is PWM based and goes to everything on the dash.
Easy to spot on the vehicles circuit diagram
|
6th Aug 2012 5:33 pm |
|
|
toxxic
Member Since: 27 Jun 2011
Location: Saskatoon
Posts: 87
|
would it be under "INSTRUMENT CLUSTER AND PANEL ILLUMINATION" in the manual?. If it is apparently there is a red and brown wire at the back of the sat nav unit. I'll open up console see if i can find it tomorrow. Land Rover LR3 SE v4.0
Matte Black Wrapped with Chrome Edging, Front Grille, Aftermarket Reversing Camera, Aftermarket Parking Sensors, Curt Class III Hitch,
|
7th Aug 2012 3:26 am |
|
|
BBS SPY
Site Sponsor
Member Since: 15 Jun 2007
Location: Sunny Cyprus
Posts: 3054
|
Yep Toxxic that would be the right page and that does sound about right.
|
7th Aug 2012 7:24 pm |
|
|