Member Since: 26 Mar 2012
Location: north east
Posts: 66
Just what I was looking for thanks lads.
28th Jul 2012 1:44 pm
grzesiul
Member Since: 11 May 2008
Location: UK
Posts: 6301
just changed wrapped disks on mine drives and brakes like new
unde 2H job both sides takingit easy
28th Jul 2012 2:54 pm
bryce28
Member Since: 26 Mar 2012
Location: north east
Posts: 66
It's taken me all day but I am a novice. I have one question, since I removed the calibre what nm do I toque it back up to as I went with 35 is that right.
28th Jul 2012 2:58 pm
grzesiul
Member Since: 11 May 2008
Location: UK
Posts: 6301
caliper bracket 275 nm
disc torx bolt 35 nm
caliper bolts 35 nm
and you should be ok
cheers
28th Jul 2012 3:11 pm
bryce28
Member Since: 26 Mar 2012
Location: north east
Posts: 66
So 35nm for the brake hose, I did the calibre to the bracket at 35nm as the guide says, but there's nowt about new for old calibre change on re attaching the brake pipe, the bleed nipple is 10nm that's where wear senors locates. I just don't fancy driving the car till I know its at the right torque
So 35nm for the brake hose, I did the calibre to the bracket at 35nm as the guide says, but there's nowt about new for old calibre change on re attaching the brake pipe, the bleed nipple is 10nm that's where wear senors locates. I just don't fancy driving the car till I know its at the right torque
25 to 35nm should be fine for the brake pipe.
Flack
28th Jul 2012 4:02 pm
bryce28
Member Since: 26 Mar 2012
Location: north east
Posts: 66
Nice one I don't have to redo it. It stops loads better now. I'm going to do the rear disks next month the guide is so helpful there will for sure be a site donation
28th Jul 2012 8:01 pm
grzesiul
Member Since: 11 May 2008
Location: UK
Posts: 6301
the best part for me no more squeeling
28th Jul 2012 8:04 pm
bryce28
Member Since: 26 Mar 2012
Location: north east
Posts: 66
I had to do mine the pads where all at different thickness the os was not working so the ns was down to 3 mm the other side was 7/8mm, it's been a expensive task I had zero tools least I can tackle the other jobs on the car now.
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum