youngscottie
Member Since: 29 Apr 2011
Location: scotland stirling
Posts: 36
  
|
hi folkes
just wondering what blades most people use when cutting through the lower wishbone bolts
changed my os arm last week and im not wanting to go through that again 
have got the ns to do this weekend and figure it would be best to cut the bolts but there hardened
and blunt my air hacksaw blades
so the question is what do people use
any help appreciated
thanks
Alan
|
 25th Jul 2012 9:44 pm |
|
|
|
|
disco_steve
Member Since: 25 Aug 2009
Location: Are you sure this is the M5 ?
Posts: 1498
 
|
I used on of these with 18tpi bosch flexi blades 
http://www.ryobi-direct.com/acatalog/Ryobi...reen_.html Never get mad - get even !!
06 D3 now gone to family member and still going strong at 265k
previous vehicles:
04 D2 TD5 - (clocked 189k from new)
52 X-Trail 2.2 SVE
various euro boxes !
|
| 25th Jul 2012 10:21 pm |
|
|
youngscottie
Member Since: 29 Apr 2011
Location: scotland stirling
Posts: 36
|
thanks friend
will try
|
| 25th Jul 2012 10:23 pm |
|
|
worked a treat, just use a little oil and don't be too hard on them, let them cut nice and steady - simples! 8)
