tdv6tom
Member Since: 02 Feb 2009
Location: Northern Ireland
Posts: 127
  
|
| Foot well light modification |
|
HI All, after spending a fair while searching the site (with no success) for info regarding the install of foot well lights and door card entry lights i am forced to ask, has anyone know of any links or could point me in the right direction?
Thanks in advance,
Tom
|
 9th Jul 2012 3:07 pm |
|
|
|
|
nighthawk
Member Since: 24 Jul 2010
Location: Malta
Posts: 1163
 
|
Footwell lights are easy. Just pop off the panel under the dash, fit the lights and connect the plug that is taped up in foam.
Door card lights... you need to remove the door card and cut the hole for the lights to fit. I used a demel tool. Best to cut small then slowly widen and trim until it fits as if you cut too big you won't be able to fit it securely unless you got a new door card. Once cutout is done, fit the light and connet the plug that is similarly taped up in foam.
Easy job if only a bit tedious since there are 4 door cards to rip off, cut and refit. Dennis
2006 Discovery 3 TDV6 Commercial Manual Buckingham Blue
|
| 9th Jul 2012 3:25 pm |
|
|
