youngscottie
Member Since: 29 Apr 2011
Location: scotland stirling
Posts: 36
![](templates/vbnew/images/spacer.gif)
![2005 Discovery 3 TDV6 S Manual Santorini Black 2005 Discovery 3 TDV6 S Manual Santorini Black](../images/veh/santorini_black.gif)
|
Hi guys
Looking for a bit advice really
My friendly mot tester picked up on my front wishbones rear bushes being worn (disco 3)
So I ordered new arms genuine lr ones fitted the os arm today
And it has as much side to side movement as the old one!
I'm wondering if these bushes have a fair amount of side to side as standard
Because the old ones had no knocks or wobbles
Any thoughts on this
Cheers
Alan
|
14th Jul 2012 9:00 pm |
|
|
Flack
Member Since: 06 Sep 2006
Location: Preston Lancashire
Posts: 6271
![](templates/vbnew/images/spacer.gif)
![2007 Discovery 3 TDV6 XS Auto Stornoway Grey 2007 Discovery 3 TDV6 XS Auto Stornoway Grey](../images/veh/stornoway_grey.gif)
|
Side to side movement.. Can you be more specific .. there should be no movement from the bushes once they arm is fitted, did you use new bolts and did you mark the position of the bolts and set to the correct height measurement before you did the final torque loading.
Flack
|
14th Jul 2012 10:41 pm |
|
|
Disco_Mikey
Member Since: 29 May 2007
Location: Dundee, Scotland
Posts: 20783
![](templates/vbnew/images/spacer.gif)
![2005 Discovery 3 TDV6 HSE Auto Cairns Blue 2005 Discovery 3 TDV6 HSE Auto Cairns Blue](../images/veh/cairns_blue.gif)
|
Flack wrote:Side to side movement.. Can you be more specific .. there should be no movement from the bushes once they arm is fitted
The rear bushes on a D3 are open-voided bushes, and as such, there will always be side-to-side movement.
I have lost count of the amount of MOT stations I have argued with over the amount of "allowable" movement for a test...
One of the stations we used to use tried to fail a car for excessive movement, despite the car having just had a set of brand new wishbones fitted
As a general rule, if you dab the brakes quickly, and there is a clunk, chances are it will be wishbone bushes My D3 Build Thread
TDV8 Retrofit Build Thread
|
15th Jul 2012 6:42 am |
|
|
youngscottie
Member Since: 29 Apr 2011
Location: scotland stirling
Posts: 36
![](templates/vbnew/images/spacer.gif)
![2005 Discovery 3 TDV6 S Manual Santorini Black 2005 Discovery 3 TDV6 S Manual Santorini Black](../images/veh/santorini_black.gif)
|
Thanks guys
The cars going for an alignment check so I've set the. Ew bolts roughly
Where the old ones were
As you say open void rubber bushes and obviously the old ones
Are ok as the new one I've fitted is the exact same
O well I'll fit the ns as a matter of course now but I think I'll find
A new mot guy in future
A lot of expense that wasn't required
On a side note do yous do mots Mikey ?
Might youse yourselfs in the future as I'm sure we have an account
With yourselfs (mts recovery)
|
15th Jul 2012 8:19 am |
|
|