Member Since: 23 May 2011
Location: Birmingham
Posts: 197
CTEK and towing electrics - how?
Hi all
As title really.
I've got the info regarding the wires to the plugs but was wondering how you guys that do, connect the charger to the cable coming from the toeing electrics on the car?
Don't want to cut the connection plug off the charger as I intend to use it on a leisure battery I have.
I'm probably bring thick but hey if unsure Ask
Thanks
MarkIf you always do what you've always done, You'll always get what you've always got
2005 HSE D3
You need to make up a lead with a 7pin S plug on one end and a CTEK connector on the other. Get both on eBay for a few quid.
Keep the lead shortish (a metre or two is fine).____
Gone: 10MY L320 RR Sport HSE, Ipanema Sand
Gone: 20MY Jaguar iPace HSE, Silicon Silver
Gone: 17MY RR Evoque SE Tech, Loire Blue
Gone: 08MY Discovery 3 XS, Stornoway Grey
Gone: 07MY FFRR TDV8 Vogue, Stornoway Grey
28th Jun 2012 7:08 pm
Robbie
Member Since: 05 Feb 2006
Location: ¯\_(ツ)_/¯
Posts: 17932
Robbie wrote:
Pin 3 Earth & Pin 4 Live on 12S. I used ebay for the correct plug.
Land Rover - Turning Drivers into Mechanics Since 1948
Member Since: 23 May 2011
Location: Birmingham
Posts: 197
Thanks for the replies both.
I'm still a bit confused though.
The car is about 5m from the house on my drive way. My plans are to run a lead (7 core towing electrics) with the 7 pin S plug connected to the car , wired to the correct pins as illustrated (thanks) into the house where the charger will be.
I then need to connect the lead from the car to the charger if you see what I mean. I would like to keep the charger in the house whilst connected to the car whilst I'm at work.
I have the lead in the ebay link. Does it matter how long the lead to the car is?
Just trying to think of the best way to keep the charger on the car without it being damaged by weather or stolen.
Thanks
MarkIf you always do what you've always done, You'll always get what you've always got
2005 HSE D3
Only that from experience the longer the lead from charger to car, the more voltage drop you'll get and the more likely it is that the charging electronics in the CTEK will struggle to detect battery state. If you have to use a long lead, make it a fat one...____
Gone: 10MY L320 RR Sport HSE, Ipanema Sand
Gone: 20MY Jaguar iPace HSE, Silicon Silver
Gone: 17MY RR Evoque SE Tech, Loire Blue
Gone: 08MY Discovery 3 XS, Stornoway Grey
Gone: 07MY FFRR TDV8 Vogue, Stornoway Grey
28th Jun 2012 11:00 pm
Bushwanderer
Member Since: 27 Nov 2007
Location: Northern Rivers, NSW, Australia
Posts: 2050
Mark,
What about locking the charger in the car?
Best Wishes,
PeterThe Bearded Dragon
29th Jun 2012 4:53 am
CUCO
Member Since: 27 May 2011
Location: Spain & Oleee!!!
Posts: 609
13 pin tow bar electric layout
Click image to enlarge
16th Sep 2012 11:00 pm
johnnychainsaw
Member Since: 24 Nov 2009
Location: West Sussex
Posts: 1222
Can anyone tell me if I can wire my standard battery charger to charge through towing electrics. Don't really want to buy ctek charger yet, although it does look like a good piece of kit.
16th Jan 2013 2:29 pm
CUCO
Member Since: 27 May 2011
Location: Spain & Oleee!!!
Posts: 609
Yes, you can...but do not forget to disconect when full chargeg if the charger you install dont have "maintan option"
16th Jan 2013 2:31 pm
crwoody
Member Since: 09 Mar 2009
Location: Littleborough
Posts: 2109
Charging via towing electrics will work with any charger up to about 10 - 15 amps or so, much beyond that you may risk frying the wiring or blowing a fuse.
Just need to be aware of the limitations if there's no trickle charge function on the charger though, you wouldn't want to cook the battery.Clive
16th Jan 2013 2:35 pm
johnnychainsaw
Member Since: 24 Nov 2009
Location: West Sussex
Posts: 1222
16th Jan 2013 2:40 pm
Martin Site Admin and Owner
Member Since: 06 Nov 2004
Location: Hook Norton
Posts: 18507
I can build adapters with any connector on if you let me know what to use 06 D3 SE / 15 LR D90 XS SW / 88 LR 90 Td5 / 68 BMW 2000 ti
Any issues with the site let me know!
16th Jan 2013 2:55 pm
johnnychainsaw
Member Since: 24 Nov 2009
Location: West Sussex
Posts: 1222
Thanks Martin, but is it not as simple as wiring leads from charger directly into plug using pins 3 and 4 as stated?
16th Jan 2013 4:21 pm
Martin Site Admin and Owner
Member Since: 06 Nov 2004
Location: Hook Norton
Posts: 18507
If you have the ability to do it then fine 06 D3 SE / 15 LR D90 XS SW / 88 LR 90 Td5 / 68 BMW 2000 ti
Any issues with the site let me know!
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum