Member Since: 27 Dec 2020
Location: Kings lynn
Posts: 6
EPB
Hi all,
Having an issue with the epb on my d3. Had the fault with poorly adjusted shoes and the screecing noise when applying hand brake. I follwed the guide for stripping the epb and replacing the damaged plastic gears. Once reassembled i tried the handbrake but it winds the Lh cable all the way back out again until it disconnects.
Every which way i try it ends up unwinding the Lh cable.
Any ideas please.
9th Nov 2021 12:21 am
aja4x4
Member Since: 14 Apr 2019
Location: Westbury
Posts: 2463
Did you check and adjust the shoes.Andrew
D3 2.7tdv6 2005
D4 3.0 SDV6 Commercial died and gone to LR heaven
D5 3.0 SDV6 HSE
9th Nov 2021 7:23 am
Pobski1980
Member Since: 27 Dec 2020
Location: Kings lynn
Posts: 6
Yes, sorry should of put that. I stripped down shoes, cleaned refitted and readjusted shoes.
9th Nov 2021 10:09 am
Globetrotter448
Member Since: 21 Mar 2017
Location: Londonderry NSW
Posts: 1804
Sound like motor turning the wrong way. Check the connections.
20th Nov 2021 8:29 am
Pobski1980
Member Since: 27 Dec 2020
Location: Kings lynn
Posts: 6
Connections are correct way round.
16th Dec 2021 11:04 pm
Globetrotter448
Member Since: 21 Mar 2017
Location: Londonderry NSW
Posts: 1804
A possible problem may be that it thinks its in the "replace shoes mode" which winds the cables out to make it easier. Have you a code reader so you can take it out of this mode.
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum