Advertise on DISCO3.CO.UK
Forum · Gallery · Wiki · Shop · Sponsors
DISCO3.CO.UK > Maintenance & Mods (D3)

Rear Wheel Getting Hot ???
Post Reply  Down to end
Page 1 of 1
c928jon
 


Member Since: 24 Jun 2009
Location: COVENTRY
Posts: 48

2005 Discovery 3 TDV6 HSE Auto Stornoway GreyDiscovery 3
Rear Wheel Getting Hot ???

Hi All, aplogies for the long read.

My Drivers side rear hub is getting very warm, IR Thermometer shows all the others at 35deg and this one at 88deg after a good run.

Today I stripped the caliper and disc off and had a good poke around.

The Parking brake pads were covered in rusty dust and showed no signs of dragging, cleaned and adjusted to be on the safe side.

I drove the brake piston out and looked for signs of corrosion or pitting, it looked pretty good, I found one minor pit, about the size of a pin head, my finger nail would just catch. Itook the high spot off with 4000 grit paper and polished the piston back up.

The piston rotated and drove back in without any great problems.

Next stage.. Whilst jacked up I checked the wheel was rotating freely, lowered the car and drove for a couple of miles (The epb wasn't on at any time), only braked VERY gently twice from about 10mph.

Got back, all other hubs at 16deg and this one at 35deg!!!! ARGHH.

There is a small ammount of play in the wheel with hands at 12 and 6 o clock, nothing at 3 and 9. The play is still there with epb engaged and unwilling assistant standing on the brakes.

So the question is...which first..wheel bearing or caliper???? Or anything else I've missed?

Thanks
  
Post #5949661st Feb 2010 7:07 pm
View user's profile Send private message View poster's gallery Reply with quote
DSL
Keeper of the wheelie bin 


Member Since: 11 May 2006
Location: Off again! :-)
Posts: 73131

Ukraine 

Had this on 3 calipers over 18 months, all replaced. Just waiting for the 4th to go. Noticed heat after vibration when driving, brake disc glowing at one point!
   
Post #5949751st Feb 2010 7:16 pm
View user's profile Send private message View poster's gallery Reply with quote
al cope
 


Member Since: 08 Nov 2005
Location: Oldbury, WM
Posts: 10361

England 

EPB stuck caused this on mine, not fully disengaging, wheel got hot enough to pop the centercap out.

Al
 Volvo XC90 B5 Plus Dark
Gone - MY18 D5 HSE - Corris on 22's with Black Pack
Now gone - MY16 D4 SE Tech, Loire Blue, Almond Leather, Privacy, plus some other goodies.
Old - MY12 D4 SDV6 XS Auto - Ipanema Sand with Almond Leather - Plus other niceties, and D4.com sticker
Older - D3 TDV6 XS Auto - Lugano Teal with Almond Leather, 20" Stormers, Shiny Tailpipes, DVD/TV - and obligatory D3 sticker
Ancient - D3 TDV6 S - Tonga with Ebony, 20" Stormers, satnav & DVD 
 
Post #5953142nd Feb 2010 8:15 am
View user's profile Send private message View poster's gallery Send e-mail Reply with quote
ronp
 


Member Since: 29 Nov 2006
Location: North Yorkshire
Posts: 15272

Scotland 2014 Discovery 4 3.0 SDV6 HSE Auto Corris GreyDiscovery 4

My money's on the Caliper. Thumbs Up
 ...... always on the road less travelled 🚧

< ‘tis but a mere scratch …….. it’ll polish out. 
 
Post #5953712nd Feb 2010 10:09 am
View user's profile Send private message View poster's gallery Reply with quote
redjelly5000
 


Member Since: 18 Jul 2008
Location: Rugby
Posts: 473

England 2008 Discovery 3 TDV6 HSE Auto Buckingham BlueDiscovery 3

Just had this problem on mine on the exact same wheel. Also had vibrations, and it turned out (thanks to diagnosis help from all on here) that the park brake shoes had been binding and causing the extra heat. The end result was that the shoes delaminated and the broken pieces of lining spinning around in the drum were what caused the vibrations.

New shoes, solved the problem, but they aren't cheap. £50 per side. Incidentally, at first glance it would seem that they are only available from LR, but I found out you can get the very same parts from Britpart, but I don't know if the price is any less.
 D3 TDV6 HSE 2008 Buckingham Blue (current)
D3 TDV6 HSE 2009 Zermatt Silver (previous)
D3 TDV6 HSE 2005 Maya Gold (previous)
D2 TD5 ES 1999 (previous)
Defender TD5 swb hard top 2005 (previous)
Defender 300tdi swb hard top 1994 (previous) 
 
Post #60150211th Feb 2010 12:22 pm
View user's profile Send private message View poster's gallery Reply with quote
DiscoDunc
 


Member Since: 08 May 2006
Location: Bristol
Posts: 16390

England 2010 Discovery 4 3.0 SDV6 HSE Auto Aintree GreenDiscovery 4

sounds like caliper. had the same on mine - the caliper could be pushed back in by hand but didnt move on its own. there was no sign of corrosion etc.

http://disco3.co.uk/forum/topic31775.html?highlight=hot+wheels
 Duncan
-----------------------------------------------------
If I'd known I was going to be so thirsty this morning I'd have drunk more beer last night.
FFRR Autobiography 4.4 SDV8 MY17
D4 HSE MY13 SOLD
FFRR 3.6 Vogue TDV8 SOLD
D4 HSE MY10 SOLD
D4 SE TECH MY15 SOLD
D4 XS MY12 SOLD
D4 HSE MY10 SOLD
D3 HSE MY06 - Re-Cycled Worldwide 
 
Post #60162811th Feb 2010 4:51 pm
View user's profile Send private message View poster's gallery Reply with quote
c928jon
 


Member Since: 24 Jun 2009
Location: COVENTRY
Posts: 48

2005 Discovery 3 TDV6 HSE Auto Stornoway GreyDiscovery 3

Just a quick thanks, all those who had their money on the caliper........YOU WIN!
  
Post #60373215th Feb 2010 11:17 am
View user's profile Send private message View poster's gallery Reply with quote
DSL
Keeper of the wheelie bin 


Member Since: 11 May 2006
Location: Off again! :-)
Posts: 73131

Ukraine 

   
Post #60375015th Feb 2010 11:41 am
View user's profile Send private message View poster's gallery Reply with quote
Stupot
 


Member Since: 16 Jul 2009
Location: Grantham
Posts: 8

United Kingdom 2007 Discovery 3 TDV6 SE Manual Alveston RedDiscovery 3

Hi everybody, i had this problem about six months ago, one side rear wheel getting very hot, it had worn the pad away nearly down to metal. so had two new discs and pads fitted, the mechanic noticed the rear flexi brake hose was collapsing/soft, he said it was causing the caliper to hold some pressure, and the pads to bind, new hose and it was perfect, now, four months on, the other side has started the same tricks, so new brake hose on order.
 In a land Rover the other vehicle is the crumple zone.  
Post #93278817th May 2012 10:08 pm
View user's profile Send private message View poster's gallery Send e-mail Post Reply
Display posts from the last:  
Post Reply Back to top
Page 1 of 1
Jump to:  
Previous Topic | Next Topic >


Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



DISCO3.CO.UK Copyright © 2004-2024 Futuranet Ltd & Martin Lewis
DISCO3.CO.UK RSS Feed - All Forums

DISCO3.CO.UK is independent and not affiliated to Land Rover.
Switch to Mobile Site