| Home · FAQ · New Posts · My Posts · PMs · Search · Members · Members Map · Groups · Profile · Donate ·
Log In
|
- You are currently viewing DISCO3.CO.UK as a guest - Register to take part or Log In
Saltydog
Member Since: 21 Feb 2011
Location: Aberdeenshire
Posts: 45
  
|
| Front Number Plate Holder |
|
Does anyone know if there is another type of front number plate holder for the Discovery 4.
I am fitting a short (length wise) number plate to the front and when I have removed the standard one the holder is fixed with 4 x Screws and is ribbed along the length which will look a bot daft with the short number.
I have looked at just removing the holder and mounting the number directly on the bumper but sods law there are four holes in it from the number plate holder.
I wondered if there might be another company producing an alternative holder which although made for a full length number plate might suit a shorter one.
Any ideas would be more than welcome.
Cheers. Brand Loyalty Is An Expensive Business
Defender Series II ( green )
Defender Series III ( red )
Discovery 1 ( silver )
Discovery 2 ( green )
Discovery 3 ( silver )
Range Rover ( black )
Freelander ( green)
Discovery 3 ( black )
Discovery 4 ( black )
Discovery 4 ( blue )
Defender 90 HT ( green )
Defender 90 HT ( grey )
Discovery Sport ( silver )
Defender 110 XS UW ( grey ) current
Discovery 4 Landmark ( black ) current
|
 18th Apr 2012 9:03 am |
|
|
chalky
Member Since: 22 Aug 2008
Location: Yorkshire
Posts: 3145
  
|
There will prob be a shorter type square effect for the US market ? Maybe
But I thought number Plates had to be a certain width hight & length to be legal ?
That may or may not be true though so don't quote me but it's certainly worth looking into. Only dead fish go with the Flow !
|
| 18th Apr 2012 9:18 am |
|
|
Peely
Member Since: 12 Dec 2011
Location: Lancs
Posts: 283
 
|
It's not the length of plate that counts, it's the numbers and spacings that matter.
I have never seen a shorter length holder though, and I doubt there will be different lengths to acommodate every configuration of number plate ?
The only different one's I've seen are Jap imports and one's for US vehicles, and both are 2 lined plate holders, ie square.
You might want to have a look on the good old '*bay' for suggestions ......
|
| 18th Apr 2012 10:08 am |
|
|
Saltydog
Member Since: 21 Feb 2011
Location: Aberdeenshire
Posts: 45
|
The plate is made with the correct spacings, the height is the same as a standard plate only the width is less.
The plate is 330 x 111mm
A plate holder with a smooth solid back might do the job I guess. Brand Loyalty Is An Expensive Business
Defender Series II ( green )
Defender Series III ( red )
Discovery 1 ( silver )
Discovery 2 ( green )
Discovery 3 ( silver )
Range Rover ( black )
Freelander ( green)
Discovery 3 ( black )
Discovery 4 ( black )
Discovery 4 ( blue )
Defender 90 HT ( green )
Defender 90 HT ( grey )
Discovery Sport ( silver )
Defender 110 XS UW ( grey ) current
Discovery 4 Landmark ( black ) current
|
| 18th Apr 2012 10:18 am |
|
|
ronp
Member Since: 29 Nov 2006
Location: North Yorkshire
Posts: 15213
|
Could you not just 'cut n shut' it ?
Most of the join would be covered by the number plate and providing you're neat with the cut [and due to the low down location] it shouldn't be that visible.
Just a thought  I was a normal heterosexual chap, but in these new woke awakenings I now identify as a Wardrobe.
|
| 18th Apr 2012 10:21 am |
|
|
Saltydog
Member Since: 21 Feb 2011
Location: Aberdeenshire
Posts: 45
|
Cutting it would work, but then I would be left with 4 holes in the actual bumper....!
Wondering if a plate holder from another vehicle with a solid back might work....still looking on *bay ! Brand Loyalty Is An Expensive Business
Defender Series II ( green )
Defender Series III ( red )
Discovery 1 ( silver )
Discovery 2 ( green )
Discovery 3 ( silver )
Range Rover ( black )
Freelander ( green)
Discovery 3 ( black )
Discovery 4 ( black )
Discovery 4 ( blue )
Defender 90 HT ( green )
Defender 90 HT ( grey )
Discovery Sport ( silver )
Defender 110 XS UW ( grey ) current
Discovery 4 Landmark ( black ) current
|
| 18th Apr 2012 10:32 am |
|
|
B16 KJR
Member Since: 10 Jul 2006
Location: Rosyth, Fife
Posts: 3005
|
Would it not be a whole lot easier just to get a standard length number plate, save a lot of hassle
|
| 18th Apr 2012 11:05 am |
|
|
Russell
Member Since: 24 Aug 2007
Location: Kent
Posts: 10564
|
What about the holders on an early D3 are they the same or slightly diffrent? Think Nick had some or could get hold of them, might be worth a try. MY17 D5 1st Edition Namib Orange
MY15 D4 HSE Kaikoura Stone
MY12 D4 HSE Nara Bronze Sold and gone
MY11 D4 HSE Stornaway Grey Sold and gone
D3 S spec Silver Sold and gone
Tow bar, full length roof bars, side steps, tow bar storage unit, surround camers.
D4 camera club
|
| 18th Apr 2012 1:01 pm |
|
|
|
Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
|
DISCO3.CO.UK Copyright © 2004-2024 Futuranet Ltd & Martin Lewis
|
|
DISCO3.CO.UK is independent and not affiliated to Land Rover.
