DiscoDunc
Member Since: 08 May 2006
Location: Bristol
Posts: 16390
  
|
whats the best way to join 2 x 170 Amps Battery Cable to 1 x 170 Amp battery cable , so that live connectors/terminals dont touch anything of course Duncan
-----------------------------------------------------
If I'd known I was going to be so thirsty this morning I'd have drunk more beer last night.
FFRR Autobiography 4.4 SDV8 MY17
D4 HSE MY13 SOLD
FFRR 3.6 Vogue TDV8 SOLD
D4 HSE MY10 SOLD
D4 SE TECH MY15 SOLD
D4 XS MY12 SOLD
D4 HSE MY10 SOLD
D3 HSE MY06 - Re-Cycled Worldwide
|
 16th Apr 2012 2:52 pm |
|
|
2DISCO3ORNOT
Member Since: 27 Apr 2009
Location: at sea
Posts: 1209
|
Can you not replace the cable to get them all on to the relevant terminals 
|
| 16th Apr 2012 3:10 pm |
|
|
DiscoDunc
Member Since: 08 May 2006
Location: Bristol
Posts: 16390
|
that would mean running 4 battery cable down the chassis rails.
I really only want to run the extra cable less than 1m into the boot area.
I'll have a +ve and -ve running from the main battery to the rear bumper and wanted to take a join off into the boot for a possible Aux battery pack.
wanted to keep cables to a minimum as 4 x 10mm cables take up a lot of space. Duncan
-----------------------------------------------------
If I'd known I was going to be so thirsty this morning I'd have drunk more beer last night.
FFRR Autobiography 4.4 SDV8 MY17
D4 HSE MY13 SOLD
FFRR 3.6 Vogue TDV8 SOLD
D4 HSE MY10 SOLD
D4 SE TECH MY15 SOLD
D4 XS MY12 SOLD
D4 HSE MY10 SOLD
D3 HSE MY06 - Re-Cycled Worldwide
|
| 16th Apr 2012 3:25 pm |
|
|
|
|
DiscoDunc
Member Since: 08 May 2006
Location: Bristol
Posts: 16390
|
that would be ok. ive got crimpers, could grease it up and screw it inside the boot or on chassis rail
Thanks
how did you fit your Aux battery into the boot - it doesnt look as if it will fit, even though your photos show it obviosuly does ? Duncan
-----------------------------------------------------
If I'd known I was going to be so thirsty this morning I'd have drunk more beer last night.
FFRR Autobiography 4.4 SDV8 MY17
D4 HSE MY13 SOLD
FFRR 3.6 Vogue TDV8 SOLD
D4 HSE MY10 SOLD
D4 SE TECH MY15 SOLD
D4 XS MY12 SOLD
D4 HSE MY10 SOLD
D3 HSE MY06 - Re-Cycled Worldwide
|
| 16th Apr 2012 3:38 pm |
|
|
wiggs
Member Since: 03 Sep 2006
Location: Manchester
Posts: 14368
 
|
you could also use a battery isolator ..although you would need 2 ( or one isolator and one joining block )
my battery ...look here http://www.disco3.co.uk/forum/topic67350.h...boot+%2Bd4
read the 2nd page aswell as there was issues with it pushing the body panel out   G4 Gone ...but not forgotten
|
| 16th Apr 2012 4:09 pm |
|
|
DiscoDunc
Member Since: 08 May 2006
Location: Bristol
Posts: 16390
|
Duncan
-----------------------------------------------------
If I'd known I was going to be so thirsty this morning I'd have drunk more beer last night.
FFRR Autobiography 4.4 SDV8 MY17
D4 HSE MY13 SOLD
FFRR 3.6 Vogue TDV8 SOLD
D4 HSE MY10 SOLD
D4 SE TECH MY15 SOLD
D4 XS MY12 SOLD
D4 HSE MY10 SOLD
D3 HSE MY06 - Re-Cycled Worldwide
|
| 16th Apr 2012 4:44 pm |
|
|
