Advertise on DISCO3.CO.UK
Forum · Gallery · Wiki · Shop · Sponsors
DISCO3.CO.UK > North America & LR3/4

Air suspension problem
Post Reply  Down to end
Page 1 of 1
TurCan
 


Member Since: 18 Dec 2011
Location: Toronto
Posts: 2

Canada 2005 LR3 4.4 V8 HSE Auto Zambezi SilverLR3
Air suspension problem

Hello all,

This is my first post, any help you can provide would be great.

My 2005 LR3's front right suspesion sits lower than others, as the rear left sits higher. This problem causes the truck pulls to right. There are no fault messages or lights on. Compressor seems working as i can hear the pumping noise when i start the truck... and although there are no obstacles under the truck, it often goes to the extended height mode, when i start the truck. Any idea what would be the problem?

Thank you!

Jim
  
Post #91135418th Mar 2012 5:10 pm
View user's profile Send private message View poster's gallery Reply with quote
DiscoDunc
 


Member Since: 08 May 2006
Location: Bristol
Posts: 16390

England 2010 Discovery 4 3.0 SDV6 HSE Auto Aintree GreenDiscovery 4

strange there are no fault codes but i would change the height sensors to start off with.

welcome Thumbs Up

EDIt - when you say not fault messages - do you mean no dashboard messages or have you have it plugged in to a diagnostic machine. if no, get that done and it may show up some fault codes.
 Duncan
-----------------------------------------------------
If I'd known I was going to be so thirsty this morning I'd have drunk more beer last night.
FFRR Autobiography 4.4 SDV8 MY17
D4 HSE MY13 SOLD
FFRR 3.6 Vogue TDV8 SOLD
D4 HSE MY10 SOLD
D4 SE TECH MY15 SOLD
D4 XS MY12 SOLD
D4 HSE MY10 SOLD
D3 HSE MY06 - Re-Cycled Worldwide 
 
Post #91135818th Mar 2012 5:18 pm
View user's profile Send private message View poster's gallery Reply with quote
TurCan
 


Member Since: 18 Dec 2011
Location: Toronto
Posts: 2

Canada 2005 LR3 4.4 V8 HSE Auto Zambezi SilverLR3

DiscoDunc wrote:
strange there are no fault codes but i would change the height sensors to start off with.

welcome Thumbs Up

EDIt - when you say not fault messages - do you mean no dashboard messages or have you have it plugged in to a diagnostic machine. if no, get that done and it may show up some fault codes.


Thank you for the reply,

I was suspecting the sensors too. I think after replacing them with the new ones, suspensions supposed to recalibrated by a Land Rover dealer. I mean i have to bring the truck to the dealer?
As the fault messages, i meant no dashboard messages. Actually, about a month ago it has been plugged in to a diagnostic machine because of check engine light, while this suspension problem persists. It came up with O2 sensors bank1 both side. They have been replaced with the new ones, but no other fault codes were found.
  
Post #91137918th Mar 2012 6:21 pm
View user's profile Send private message View poster's gallery Reply with quote
SADISCOBOB
 


Member Since: 08 Oct 2010
Location: Alberton
Posts: 246

South Africa 2006 Discovery 3 4.4 V8 HSE Auto Stornoway GreyDiscovery 3

Get yourself an 'EAS 11d Tool' that is made in Canada. You then be able to do all work on your suspension including reset the height sensors - this latter may be all that is required. Info' on 11d tool is on this site - just search.
 Life always good with a Landy

2006 LR DISCO 3 4.4 V8 HSE
DISCO 1 2.8 TDi
DISCO11 TD5
RR CLASSIC 1980 3.5 V8 
 
Post #98225927th Sep 2012 10:16 am
View user's profile Send private message View poster's gallery Send e-mail Post Reply
Display posts from the last:  
Post Reply Back to top
Page 1 of 1
Jump to:  
Previous Topic | Next Topic >


Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



DISCO3.CO.UK Copyright © 2004-2024 Futuranet Ltd & Martin Lewis
DISCO3.CO.UK RSS Feed - All Forums

DISCO3.CO.UK is independent and not affiliated to Land Rover.
Switch to Mobile Site