Eniam17
Member Since: 05 Mar 2012
Location: Maine
Posts: 2
  
|
Does anyone know if an Autel MS300 Maxiscan OBDII scanner works with an LR3 (US Spec)? I just bought an 08 and can't get anything but Link Error. I know this tool is cheap and I should probably buy a new one. Thanks for any advice.
|
 5th Dec 2012 11:53 pm |
|
|
westderbysi
Member Since: 04 Feb 2012
Location: Liverpool
Posts: 79
  
|
im not sure if the autel ms300 works but i have the autel maxidiag elite 802 model and it reads and clears all sub ecu systems but wont do recalibration of steering sensors etc but will check and clear codes and also covers nearly all other makes of cars
|
| 9th Dec 2012 3:23 pm |
|
|
stephenw46
Member Since: 22 Jun 2011
Location: West Midlands
Posts: 1182
 
|
I did a bit of research and there were only two choices that I found would do the job I purchased the hawkeye which for me as saved alot of money but if you want to do more then me the bell autos one off here is the better of the two hope this helps
|
| 9th Dec 2012 4:25 pm |
|
|
