wacc
Member Since: 26 Feb 2008
Location: Cope NSW
Posts: 45
![](templates/vbnew/images/spacer.gif)
![2008 Discovery 3 TDV6 SE Auto Alaska White 2008 Discovery 3 TDV6 SE Auto Alaska White](../images/veh/alaska_white.gif)
|
just did the front pads, was going to change the pad wear cable but it disappears into the inner guard. Where does it go? no sign of it in the engine bay so how does one disconnect the old wiring and connect the new.
Bill C Disco 3 and a Bushtracker that's heaven on earth!!!
|
26th Feb 2012 11:17 pm |
|
|
wiggs
Member Since: 03 Sep 2006
Location: Manchester
Posts: 14372
![](templates/vbnew/images/spacer.gif)
![2015 Discovery 4 3.0 SDV6 HSE Auto Fuji White 2015 Discovery 4 3.0 SDV6 HSE Auto Fuji White](../images/veh/fuji_white.gif)
|
Just behind the inner guard attached to chassis rail
Just undo a couple of the inner arch clips and bend it out of the way
Some piccys in here http://www.disco3.co.uk/gallery/thumbnails.php?album=2049 G4 Gone ...but not forgotten
|
26th Feb 2012 11:25 pm |
|
|
wacc
Member Since: 26 Feb 2008
Location: Cope NSW
Posts: 45
![](templates/vbnew/images/spacer.gif)
![2008 Discovery 3 TDV6 SE Auto Alaska White 2008 Discovery 3 TDV6 SE Auto Alaska White](../images/veh/alaska_white.gif)
|
Wiggs many thanks will replace it with the new lead Disco 3 and a Bushtracker that's heaven on earth!!!
|
26th Feb 2012 11:42 pm |
|
|