Member Since: 17 Jan 2009
Location: Sittingbourne
Posts: 41
fitting xenons
Is it possible to fit xenon headlites to replace my old halogens without having to have any special electrical adjustments.
3rd Feb 2012 7:47 pm
SHARKYSHARKS
Member Since: 20 Dec 2008
Location: Saddleworth Oldham
Posts: 1954
You will have to update the CCF there are guys on here who can do it speak to Pete @ BAS ( site sponsor ).
Very helpfull bloke MY18 D5 HSE LUX😎
MY12 Freelander SD4 HSE
44 Tonne 12 Litre 6x2 Scania T cab (Current)
Freelander 1 (Wrote off 😫)
Ex D1
Ex D2 GS
Ex V8 D2 GS
Ex D3 S
Ex D4 GS
Club skip ya lockers !!!
Club BAS remote heater !!
Club Duratrac
Club Phillips DRL
Club Prospeed Rack Mk 1
Club Prospeed Rack Mk 2
Club Sankey
Club RLD spare wheel protector
They will work without the update but will flicker for about 10 seconds when they first fire up
Discovery 3/4 & RRS keys cut and programmed at your home or work
Apple CarPlay/ Android Auto retro fit - see it here
BAS Remaps/ EGR Blanking
Software updates/ enabling
Mobile Servicing & Repairs
3rd Feb 2012 7:54 pm
Bill Wright
Member Since: 03 Nov 2007
Location: Glorious Devon
Posts: 3254
That may well be the case on MY10 and My11 D4's but there is apparently a different system on the MY12 as I found to my cost. They sidelights will work fine but when you switch to headlamp, the system crashes and the vehicle electrics shut down. Switch off and switch on and all is well if you replace your halogens. BBS Spy is working on the new fixes for MY12 but has no forecast for completion.
Bill Never take life too seriously. Nobody gets out alive anyway.
D4 SDV6 SE Tech Kaikoura Stone MY15.
3rd Feb 2012 8:58 pm
boss
Member Since: 17 Jan 2009
Location: Sittingbourne
Posts: 41
Mine is a 2012my so it looks like I might have to hang on or possibly go for hids4u upgrade, has anyone used these
3rd Feb 2012 9:02 pm
WOODY179
Member Since: 01 Jun 2005
Location: Chesterfield
Posts: 3655
IIRC all D4's will require the ccf to be updated before the lights will work, this can only be done prior to the 2012 model at the moment though. On a D3 the only problem if the ccf was not updated was that the lights would flicker.
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum