Member Since: 11 Oct 2010
Location: there's no f in point
Posts: 2137
EGRs blanked?
As my FCR is showing a EGR fault I'm thinking of blanking them on my 06MY (build late 2005). A couple of questions though before I go buying the kit from Pete Bell,
1. is it 'legal' to blank off because of the emissions stuff
2. how would I tell if they've already been blanked, or replaced?
26th Dec 2011 11:29 am
Bodsy Site Sponsor
Member Since: 06 Nov 2006
Location: In the Clubhouse
Posts: 21361
No not illegal. Mot should be fine.
Only way to tell is if it's had the pipe removed (like Petes kits) or you take the pipe off to see if a blanking plate has been put in between the EGR and the top pipeBodsys Brake Bible
Clock/ SNOTM /3Flash / 4x4Info /BT Update /Service Reset/Error Codes / Gearbox Reset See It Here
26th Dec 2011 11:38 am
stew 46
Member Since: 01 Dec 2011
Location: cornwall
Posts: 10146
hi i was told by my local ind landy man should only be done if u have no prob with it , or need to sort fault out befor you do it , ??-------------------------------------------------
if you cant hold on dont let go , it ill come in handy for something even if you never use it.
D3 SE 05,
110 s wagon 300 tdi SOLD
h top transit
crew cab transit
transit connect
ausa dumper, muck truck .
peljob 2.5 digger
06 L 200 crew cab
26th Dec 2011 11:44 am
NickJ
Member Since: 11 Oct 2010
Location: there's no f in point
Posts: 2137
Ian,
Thanks, had a look at Pete's how-to manual so think I know what pipes these are. Is the whole process reversable... if things dont work out then can all the bits be successfully refitted?
26th Dec 2011 11:58 am
Bodsy Site Sponsor
Member Since: 06 Nov 2006
Location: In the Clubhouse
Posts: 21361
Yes, nothing is destrOyed.
I'd recommend you get some new bolts though.
Clock/ SNOTM /3Flash / 4x4Info /BT Update /Service Reset/Error Codes / Gearbox Reset See It Here
26th Dec 2011 12:03 pm
stew 46
Member Since: 01 Dec 2011
Location: cornwall
Posts: 10146
can you tell me how much this costs and if worth doing if its working ok ,thanks.-------------------------------------------------
if you cant hold on dont let go , it ill come in handy for something even if you never use it.
D3 SE 05,
110 s wagon 300 tdi SOLD
h top transit
crew cab transit
transit connect
ausa dumper, muck truck .
peljob 2.5 digger
06 L 200 crew cab
26th Dec 2011 12:28 pm
NickJ
Member Since: 11 Oct 2010
Location: there's no f in point
Posts: 2137
If you look at Bell Auto Systems website the kit's less than £50. I'd rather replace than it fail at an inopportune moment. I think the car performs better.
26th Dec 2011 12:36 pm
mjom89
Member Since: 13 Sep 2011
Location: Essex
Posts: 589
So why can't you do this to a 57 reg car? I'd like to blank mine but have been told I can't?
26th Dec 2011 1:01 pm
stew 46
Member Since: 01 Dec 2011
Location: cornwall
Posts: 10146
thanks Nickj ,for info.-------------------------------------------------
if you cant hold on dont let go , it ill come in handy for something even if you never use it.
D3 SE 05,
110 s wagon 300 tdi SOLD
h top transit
crew cab transit
transit connect
ausa dumper, muck truck .
peljob 2.5 digger
06 L 200 crew cab
26th Dec 2011 1:57 pm
NickJ
Member Since: 11 Oct 2010
Location: there's no f in point
Posts: 2137
@ mjom89
Think it'd something to do with the engine management system that's associated with the Euro4 engine, will throw up a hissyfit. Someone very knowledgable on this subject made a post on this within the last week IIRC.
26th Dec 2011 2:28 pm
stew 46
Member Since: 01 Dec 2011
Location: cornwall
Posts: 10146
iv heard this is a tricky job to blank off ?? not sure how long it will take-------------------------------------------------
if you cant hold on dont let go , it ill come in handy for something even if you never use it.
D3 SE 05,
110 s wagon 300 tdi SOLD
h top transit
crew cab transit
transit connect
ausa dumper, muck truck .
peljob 2.5 digger
06 L 200 crew cab
26th Dec 2011 3:25 pm
bigdave Site Sponsor
Member Since: 04 Jul 2008
Location: Cornwall
Posts: 9870
Bodsy wrote:
No not illegal. Mot should be fine.
TFC blanked mine earlier int he year and it sailed through its MOT last week, so I can confirm that its ok.
All things shipping, storage, transport. UK and worldwide.
Member Since: 11 May 2006
Location: Off again! :-)
Posts: 73045
Same here, TFC blanked mine 2 years ago and it's not been a problem in 2 MOTs. They were blanked after 2 new EGR valves (2nd set of replacments) were fitted so hopefully they'll last a while yet. Cartainly they've lasted as long as the originals and longer than the the next replacements.
26th Dec 2011 5:00 pm
pinhead
Member Since: 20 Dec 2010
Location: yorkshire
Posts: 877
First job I did since buying my disco day after I got it absolutey hate egr systems they actually raise most emmisions just reduce nox and feed your engine with its own waste
Would you eat your own waste ?
Don't know if it made any difference to anything but I know my inlet won't get coked up anymore
Time wise hour and half not hard slightly tricky to get to bolts used 3/8 drive as slightly handier than 1/2drive and shoving rags down is a must to stop loosing anything
The only thing about pete's kit that I didn't like was that it was all stainless and my magnet on a stick was no good for locating the hard to place blanks
I re used my bolts they were fine
If I did another I would expect it to take about 45 mins now I have done 1 very easy in all reality
26th Dec 2011 6:30 pm
mike23118
Member Since: 01 Oct 2010
Location: North Wales
Posts: 1028
I used the blanks of ebay just two small plate's that sit in the joint, easy to do but as above use plenty of rags to catch droped itemsNow Renault Trafic
D4 gone
D3 gone
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
