grzesiul
Member Since: 11 May 2008
Location: UK
Posts: 6278
|
my IC hose is getting very sweaty with oily residue is it early sign of it going??? checked the engine bay very well and have not noticed any leaks around the top section of the hose at all
any ideas?
|
4th Jan 2012 9:26 am |
|
|
Slimer
Site Moderator
Member Since: 06 Jan 2005
Location: Last Exit to Nowhere
Posts: 16295
|
Mine didn't have any sign of leaks but performance definitely improved when I fitted on of Petes silicone hoses so it was definitely on the way out. Easy mod to do (though the bottom fitting was a bit challenging with an Alisport intercooler fitted) and it'll rule it out at the cause of the problem if nothing else The End
|
4th Jan 2012 9:43 am |
|
|
grzesiul
Member Since: 11 May 2008
Location: UK
Posts: 6278
|
Slim I do have Pete's hose and it was one of the first ones he sold but still gets oily at the top but not around the clamp
i am hoping it is not bust
|
4th Jan 2012 9:48 am |
|
|
bellautos
Member Since: 02 Feb 2006
Location: NorthYorkshire
Posts: 2532
|
This is the first time ive heard of this once I saw this thread Are you sure the clips are tight with no sharp part cutting into the hose and that you dont have a leak from a loose clip misting onto the pipe ?
I have the very first production hose still fitted to my wifes car with no problems and many many other customers also with no problems, please check for leaks elsewhere on the engine inlet side.
where are you seeingh sweaty oil from, what part ? pics ?
Pete
|
4th Jan 2012 12:09 pm |
|
|
bellautos
Member Since: 02 Feb 2006
Location: NorthYorkshire
Posts: 2532
|
grzesiul wrote:checked the engine bay very well and have not noticed any leaks around the top section of the hose at all
any ideas?
grzesiul wrote: but still gets oily at the top but not around the clamp
i am hoping it is not bust
Please make your mind up lol, is it the top or not hehe.
Pete
|
4th Jan 2012 12:18 pm |
|
|
grzesiul
Member Since: 11 May 2008
Location: UK
Posts: 6278
|
it is getting oily wet about two-three inches behind top clamp and extends for about 15cm but it is dry after top bend all the way to the bottom of the hose
ideas or shell I get new one?
will take some some pics of it laters on
|
4th Jan 2012 12:27 pm |
|
|
grzesiul
Member Since: 11 May 2008
Location: UK
Posts: 6278
|
Quote:
grzesiul wrote:
checked the engine bay very well and have not noticed any leaks around the top section of the hose at all
any ideas?
that only means that the hose is not getting oily from outside sources imho so got to be coming out from the inside hmmm?
|
4th Jan 2012 12:31 pm |
|
|
bellautos
Member Since: 02 Feb 2006
Location: NorthYorkshire
Posts: 2532
|
Hi
Nooo, dont buy a new one ! take it off and inspect it, if it has a genuine build problem for any reason ill replace it as warranty after I have verifyed any build error. That said I really cant see how it can be from the inside as long as you have not split or cut it with the clamp or any sharp part on the clamp but we will see.
Or you have a leak on a egr blank possibily blowing mist on to the hose ? when you get pictures it will help. you can email them direct [email protected] and ill see faster.
Pete
Last edited by bellautos on 4th Jan 2012 12:52 pm. Edited 1 time in total
|
4th Jan 2012 12:48 pm |
|
|
grzesiul
Member Since: 11 May 2008
Location: UK
Posts: 6278
|
no egr blanks Pete will post them soon
weird thing is it was sand dry for over the year and started getting wet just a few weeks ago..
|
4th Jan 2012 12:52 pm |
|
|
bellautos
Member Since: 02 Feb 2006
Location: NorthYorkshire
Posts: 2532
|
Cool, as said if its a hose error you do have 12 months warranty as standard. As your hose is older than 12 months and warranty has expired ill replace it out of good will after my inspection providing the hose has failed from some non interference natural cause or material error.
Pete
|
4th Jan 2012 1:25 pm |
|
|
bellautos
Member Since: 02 Feb 2006
Location: NorthYorkshire
Posts: 2532
|
Bumped for news ?
|
6th Jan 2012 9:54 am |
|
|
M3DPO
Member Since: 22 Sep 2010
Location: Notts.
Posts: 8143
|
I'm curious, what/where is the IC hose? It can when others can't,
It will when others won't,
It goes where others don't.
|
6th Jan 2012 10:07 am |
|
|
bellautos
Member Since: 02 Feb 2006
Location: NorthYorkshire
Posts: 2532
|
The hose goes from the intercooler drivers side to the plastic inlet manifold.
Pete
|
6th Jan 2012 10:08 am |
|
|
bellautos
Member Since: 02 Feb 2006
Location: NorthYorkshire
Posts: 2532
|
News for me today may be in here or an email ?
|
7th Jan 2012 1:37 pm |
|
|