Member Since: 13 Sep 2007
Location: Allendale, NJ
Posts: 63
how do you set the new clock after the software update? I just tried this and the display just shows --//-- . Settings via the steering column stalk do not include clock. Tried resetting the clock on the radio hoping that it would transfer to the dash, but it didn't.
27th Feb 2012 5:59 pm
Bodsy Site Sponsor
Member Since: 06 Nov 2006
Location: In the Clubhouse
Posts: 21361
Open the bonnet(hood), let the car go to sleep, then undo the battery terminals.
Touch the terminal cables together (you may need a spanner to reach) NOT the battery terminals themselves but the cables for 20seconds.
Reconnect and then ignition on, should then display the time same as the clock.Bodsys Brake Bible
Clock/ SNOTM /3Flash / 4x4Info /BT Update /Service Reset/Error Codes / Gearbox Reset See It Here
27th Feb 2012 6:08 pm
mtm
Member Since: 13 Sep 2007
Location: Allendale, NJ
Posts: 63
Thanks Bodsy!
27th Feb 2012 6:13 pm
marco 110
Member Since: 15 Nov 2009
Location: SALLES 33
Posts: 1014
Hi
one question ,
Where to find the update?
This is an official Land Rover?Marco.
-D4 sdv6 HSE 2012 , high beam assist , surround cam, tv , and a lot of nice stuff..
Member Since: 10 Jul 2006
Location: Rosyth, Fife
Posts: 3005
Quote:
how do you set the new clock after the software update?
I take it this was a glitch that MTM had that needed a reset ? I assume then if that was the case, the clock would be set normally on the radio and that time would automatically transfer to the dash display ?
how do you set the new clock after the software update?
I take it this was a glitch that MTM had that needed a reset ? I assume then if that was the case, the clock would be set normally on the radio and that time would automatically transfer to the dash display ?
Flack
28th Feb 2012 1:20 pm
B16 KJR
Member Since: 10 Jul 2006
Location: Rosyth, Fife
Posts: 3005
Seeing as you will have the Faultmate plugged in already, it would be silly not to get this update on the 9th
28th Feb 2012 1:51 pm
DSL Keeper of the wheelie bin
Member Since: 11 May 2006
Location: Off again! :-)
Posts: 73086
Don't forget the reversing lights on along with the main lights from button 3 on the key fob. Forgot Bodsy had done that for me til used it last night.
28th Feb 2012 2:15 pm
Bodsy Site Sponsor
Member Since: 06 Nov 2006
Location: In the Clubhouse
Posts: 21361
Clock/ SNOTM /3Flash / 4x4Info /BT Update /Service Reset/Error Codes / Gearbox Reset See It Here
28th Feb 2012 3:11 pm
DSL Keeper of the wheelie bin
Member Since: 11 May 2006
Location: Off again! :-)
Posts: 73086
Couldn't remember what the button was programmed for so gave it a press. I was just behind the car at the time so minor moment of panic as thought SWMBO was behind the wheel. Luckily she was several hundred mies away.
Seeing as you will have the Faultmate plugged in already, it would be silly not to get this update on the 9th
Ok bud
Flack
28th Feb 2012 3:41 pm
mtm
Member Since: 13 Sep 2007
Location: Allendale, NJ
Posts: 63
B16 KJR wrote:
Quote:
how do you set the new clock after the software update?
I take it this was a glitch that MTM had that needed a reset ? I assume then if that was the case, the clock would be set normally on the radio and that time would automatically transfer to the dash display ?
Don't know if it's a glitch, but it happened twice. After seeing --//-- after software update and not finding a way to set the clock, I reloaded the original 2006 software and set the clock on the radio.
Then, after seeing Bodsy's reply here, I loaded the new software again and once again saw --//-- in the instrument cluster. After the hard reset following Bodsy's advice, the clock in the instrument cluster changed to 00:00, following the one in the radio.
28th Feb 2012 7:05 pm
pip1755
Member Since: 21 May 2011
Location: Northumberland
Posts: 3
Looks like a must have update!!
I take it will be compatible with D3 05 'S' spec? Apart from the very usable clock in dash, 3 indicator flashes and reverse lights with Headlights from middle button, does this update provide any other benefits?
Any suggestions for who or where to get this done in Tyneside / South Northumberland.
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
