devonchilliman
Member Since: 03 Nov 2008
Location: Devon
Posts: 5224
|
Trimmed to fit & Used self tappers and washers  Www.devonchilliman.co.uk
|
 30th Nov 2011 7:29 pm |
|
|
bongy
Member Since: 16 Jan 2010
Location: location location
Posts: 223
  
|
Ah! Disco 3 2.7 TDV6 55 Buckingham Blue Base
15% tints / Group Buy Stainless Steel Sill Plates / Trillogy B144 tailpipes / Stupidly Large Steel Bull Bar 8)
EGR Blanking plates / Side Steps / Very Big LR roof Box / BAS remap 
New AC condensor / New Clutch & DM Flywheel / New Air Compressor, pipe set & Relay/another new clutch plate thanks to SWMBO/ new cross over pipe (without the body coming off) 
Suzuki GSX1400 - its all torque! 8)
Bayliner 175 Capri 
Adria 660SP motorhome
|
| 30th Nov 2011 8:27 pm |
|
|
THUB
Member Since: 10 Dec 2005
Location: West Berkshire.
Posts: 717
 
|
I have just come back from the dealers. They have obtained some Aussie spec rear mudflaps for me.. They appear not to fit onto the 2012MY D4. Has anyone actually got them fitted? I know Domlandy 1 has them but they appear to be on a D3. i.e. black wheel arches. On comparing photos on the forum with the car outside it seems that the trailing end of the wheelarch is tapered on earlier models. On the D4 it is horizontal. Any suggestions? Have LR made Aussie spec for the D4? Perhaps Series flaps are the best answer?
|
| 8th Dec 2011 11:10 am |
|
|
domlandy1
Member Since: 21 Feb 2011
Location: lake vyrnwy
Posts: 253
 
|
hi there,
yup ive put them on my d3, iam sure they would fit a d4 though  i tried them against a d4 commerical we have got and iam sure they would go on.. i will compare against my dads d4 my12 hse as i was going to get him some too
mm very odd 
club roof bars
club 2x sets of mtrs
club a bar
club cill protectors
club boot liner
my truck but the wifes daily drive.... mmmm
|
| 8th Dec 2011 11:16 am |
|
|
THUB
Member Since: 10 Dec 2005
Location: West Berkshire.
Posts: 717
|
Just been to dealers again and checked on another D4. Definitely a no go situation. Apparently depends on the model XS HSE etc and the format of the rear bumper. Will be pleased to read your comments when tried on your Dad's car.
|
| 8th Dec 2011 1:08 pm |
|
|
Kidz
Member Since: 05 Oct 2009
Location: Gloucestershire
Posts: 295
|
Domlandy 1 can you post a pic of your rear mud flaps. Looking to see the difference to the series flaps. Also do you have a part number and pricing? Do the come with fixings from Landrover.
Regards
Kidz
|
| 8th Dec 2011 1:50 pm |
|
|
ozd4
Member Since: 11 Nov 2009
Location: Queensland
Posts: 92
|
Hi THUB,
The older D3 (with black arch)mud flaps are different on the rear, but the newer D3(with color code arch) the mudflaps on rear are the same,
However they are, useless (not wide or low enough) and the stiff plastic will break sooner than later.
Use the Series or there are lots of after market rubber ones that will fit
Cheers Ken
|
| 8th Dec 2011 9:12 pm |
|
|
THUB
Member Since: 10 Dec 2005
Location: West Berkshire.
Posts: 717
|
Domlandy, Did you get the flaps to fit on your Dad's D4? Just curious really because I am convinced they do not. Other posts seem to say the same thing.
|
| 10th Dec 2011 9:46 am |
|
|
Bill Wright
Member Since: 03 Nov 2007
Location: Glorious Devon
Posts: 3254
|
Just for clarification, I can confirm that D3 OEM mudflaps (UK Version) will fit MY07, MY10 (added MY11) and MY12. I've transferred the same set from each of these models as I've upgraded. All the holes in the body trim are in the same place and the profile on the rears matches exactly. Mine's an XS. There was an earlier remark about the HSE rear bumper having a different profile. I can't confirm that but I would guess that it's unlikely in terms of LR tooling on the production line.
Bill Wright Never take life too seriously. Nobody gets out alive anyway.
D4 SDV6 SE Tech Kaikoura Stone MY15.
Last edited by Bill Wright on 11th Dec 2011 11:35 am. Edited 2 times in total
|
| 11th Dec 2011 11:28 am |
|
|
devonchilliman
Member Since: 03 Nov 2008
Location: Devon
Posts: 5224
|
Bill....add MY11 to the above Www.devonchilliman.co.uk
|
| 11th Dec 2011 11:31 am |
|
|
Bill Wright
Member Since: 03 Nov 2007
Location: Glorious Devon
Posts: 3254
|
Done Never take life too seriously. Nobody gets out alive anyway.
D4 SDV6 SE Tech Kaikoura Stone MY15.
|
| 11th Dec 2011 11:35 am |
|
|
devonchilliman
Member Since: 03 Nov 2008
Location: Devon
Posts: 5224
|
Glad I'm not the only who does that  Www.devonchilliman.co.uk
|
| 11th Dec 2011 11:44 am |
|
|
Vizsla
Member Since: 13 Feb 2010
Location: Berkshire
Posts: 57
|
Fitted my Series 3 rears and OEM D4 fronts this morning.
A very big thanks to TLO for speedy service and MrH for the really helpful template to ensure the right cut out of the S3 flaps can be made - even prints out the right size on an A4 sheet - and the tips on where to attach the flaps on the arch liner
Took my time on the first one but the second was realy quick - once I was happy with positioning to ensure they were level.
Great forum for this sort of thing.
Even fixed the RLD wheel protector in the last few days (following recent threads on wheel thefts) and went to see Andy at AJS for new boots so now the cars all ready for winter 
|
| 11th Dec 2011 4:30 pm |
|
|
THUB
Member Since: 10 Dec 2005
Location: West Berkshire.
Posts: 717
|
I am still churning around looking at mudflaps. The Aussie ones do not fit. I have just come back from dealers with a set of "Series" and set of Defender mudflaps. The Series ones look rather on the large size even allowing for the piece to be cut out for the exhaust. The Defender ones are about the same width but somewhat shorter in the vertical planeand are also less flexible than the Series ones. I rather like the look of them, albeit all is by holding in situ and looking. Has anyone fitted Defender or even any after market mudflaps? SWMBO is getting a bit cheesed of with mudflaps in all conversation.
|
| 14th Dec 2011 3:43 pm |
|
|
