Advertise on DISCO3.CO.UK
Forum · Gallery · Wiki · Shop · Sponsors
DISCO3.CO.UK > General (D4)

Bell Autos FBH Kit1 on Disco4
Post Reply  Down to end
Page 1 of 1
Baschurchbill
 


Member Since: 22 Jun 2011
Location: North Wales / Shropshire
Posts: 54

United Kingdom 2011 Discovery 4 3.0 SDV6 Commercial Auto Fuji WhiteDiscovery 4
Bell Autos FBH Kit1 on Disco4

With some (quite a bit) of help from Pete I am chuffed I now have full functionality of my park heater!

Fitting was exactly the same as on Disco3 with only three wires to connect it fitts neatly under the battery cover.
A few changes with the BBS MSV2 and timed heater is activated followed by a couple of tweaks and the radio remote will now overides the time clock settings.

The Disco4 FBH operation is temperature dependant which means I cannot turn the heater on if the ambient temp is above the preset temp (7C I believe) but if the remote is operated when the temp is high (not sure what temp), the vehicle vents & cools instead.

I suspect that both the lower and upper temerastures can be changed in the ccf files but not tried.

Many thanks Pete for all your help in producing a usefull piece of kit.

Bill
  
Post #84542310th Oct 2011 5:38 am
View user's profile Send private message View poster's gallery Reply with quote
wiggs
 


Member Since: 03 Sep 2006
Location: Manchester
Posts: 14372

United Kingdom 2015 Discovery 4 3.0 SDV6 HSE Auto Fuji WhiteDiscovery 4

Why didn't you just fit the factory fit timed climate kit ?

What benifits has this got over the original ?
 G4 Gone ...but not forgotten  
Post #84551010th Oct 2011 10:22 am
View user's profile Send private message View poster's gallery Reply with quote
bellautos
 


Member Since: 02 Feb 2006
Location: NorthYorkshire
Posts: 2532

United Kingdom 2010 Discovery 4 3.0 TDV6 SE Auto Santorini BlackDiscovery 4

wiggs wrote:
Why didn't you just fit the factory fit timed climate kit ?

What benifits has this got over the original ?


Hi Ade,
This will give over the factory kit the same as it does on the D3

3x start attempt if needed.

Fuel pump prime if needed after a long summers.

GSM upgradable that when kit2 is finished which should give options like, call or text to start, status feedback from fbh via text, text to "be ready/ hot" at a specific time and the module will calculate it's run time so if it can "be ready" with a smaller run time than the standard it will. The same on very cold winter days but the other way round so it may start before 30 mins and run longer to still give you the same cabin and water temps every day, day in day out, no mater what the weather is doing. Etc. Etc.

There should be many nete added features the gsm upgrade will give over the factory fit when it's all finished.

Pete
  
Post #84599311th Oct 2011 3:00 am
View user's profile Send private message View poster's gallery Send e-mail Reply with quote
Baschurchbill
 


Member Since: 22 Jun 2011
Location: North Wales / Shropshire
Posts: 54

United Kingdom 2011 Discovery 4 3.0 SDV6 Commercial Auto Fuji WhiteDiscovery 4

Thanks Pete

You beat meet to a reply but put it far more eloquently.
It is the added function of the yet to be fitted GSM module that atracted me.

Bill
  
Post #84599711th Oct 2011 5:25 am
View user's profile Send private message View poster's gallery Post Reply
Display posts from the last:  
Post Reply Back to top
Page 1 of 1
Jump to:  
Previous Topic | Next Topic >


Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



DISCO3.CO.UK Copyright © 2004-2024 Futuranet Ltd & Martin Lewis
DISCO3.CO.UK RSS Feed - All Forums

DISCO3.CO.UK is independent and not affiliated to Land Rover.
Switch to Mobile Site