| Home · FAQ · New Posts · My Posts · PMs · Search · Members · Members Map · Groups · Profile · Donate ·
Log In
|
- You are currently viewing DISCO3.CO.UK as a guest - Register to take part or Log In
Set Me Free
Member Since: 17 Feb 2009
Location: Liege
Posts: 41
  
|
Hi everybody,
Normally, windows should open fully when pushing once the window button.
Now, this automatic opening is not working anymore... 
I have to keep the finger on the button in order to make it go down fully (same to make it go up).
Can a reset of this functionality be done ?
I heard it could be "reprogrammed" on the steering wheel.
But how ?
Thanks for your help.
|
 6th Sep 2011 4:41 pm |
|
|
WOODY179
Member Since: 01 Jun 2005
Location: Chesterfield
Posts: 3656
|
the window may need recalibrating - try the following
To recalibrate the window position, close the window and keep the switch pressed for one second.
Anti-trap mechanism (front windows
only)
If the anti-trap sensor detects an obstruction
during window closing, the window will stop
and then open slightly. This will prevent a
window trapping vulnerable parts of the body
or other obstructions.
The anti-trap feature can be overridden by
attempting to close the window at intervals of
less than 10 seconds. On the fourth attempt the
window will move up a short distance with
increased force to try and move the
obstruction. If this fails to move the obstruction, anti-trap
will be disabled until reset.
To reset anti-trap, close the window and keep
the switch pressed for one second
|
| 6th Sep 2011 4:43 pm |
|
|
Set Me Free
Member Since: 17 Feb 2009
Location: Liege
Posts: 41
|
Thank you Woody179 for your help,
I already found your answer in an earlier post but that concerned the recalibration of a window, not closing fully.
In my case, the window opens and closes fully and perfectly but I have to keep my finger on the button during the all way up/down.
Normally just pushing once on the button should open/shut the window entirely.
And that functionnality does not work anymore.
Should your recalibration correct my problem ?
Anyway, I will try.
|
| 6th Sep 2011 5:50 pm |
|
|
WOODY179
Member Since: 01 Jun 2005
Location: Chesterfield
Posts: 3656
|
The recalibration procedure should fix this problem as well - I had the same problem as you on my previous D3 and the above procedure worked fine - infact just had the same problem on my D4 and the same procedure worked 
|
| 6th Sep 2011 5:58 pm |
|
|
wiggs
Member Since: 03 Sep 2006
Location: Manchester
Posts: 14372
 
|
Just close the window ..release the button ...then hold the close button again for about 3 seconds G4 Gone ...but not forgotten
|
| 6th Sep 2011 6:05 pm |
|
|
|
Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
|
DISCO3.CO.UK Copyright © 2004-2024 Futuranet Ltd & Martin Lewis
|
|
DISCO3.CO.UK is independent and not affiliated to Land Rover.
