kukie
Member Since: 14 Nov 2010
Location: geelong vic.
Posts: 8
  
|
| amber supension warning light |
|
my anber suspension warning light comes on yet my suspension is working ok if I toggle the switch lever and restart the engine the system works up and down fine but as I drive away after a while it the amber warning light re appears has any one else had this problem? I suspect it is a loose fitting or a bad sensor any comments love my disco
|
 6th Aug 2011 11:18 am |
|
|
dub01s
Member Since: 12 Dec 2005
Location: Sydney
Posts: 40
 
|
Sometimes these errors are caused by by looms or switches. I had the same problem and read a post here that removing and cleaning out the brake light switch off the brake pedal can fix such a problem. I have had the same issue and the brake light switch was internally charred. I suspect this sends spikes over the bus and can create unrelated issues. Jul 04 Build TDV6 HSE Car #466 , Reversing Camera, Front Brembos Rear V8 brakes, Allisport intercooler, D4 Bluetooth and the odd S/W upgrade courtesy of the Faultmate MSV-2
|
| 8th Aug 2011 11:09 am |
|
|
kukie
Member Since: 14 Nov 2010
Location: geelong vic.
Posts: 8
|
| anber suspension warning sw |
|
thank you will try love my disco
|
| 8th Aug 2011 12:38 pm |
|
|
