Member Since: 17 Oct 2009
Location: Alsace
Posts: 17
Any advice welcome regarding seized air spring screw
Hi guys,
I started tonight the dismantling of different parts to remove the front lower wishbone as I wanted to replace bushings.
Everything has been removed in that area. Job was easy as replaced the lower ball joint last year (clunking is still here!).
Only both wishbone screws and air spring bottom screw are in place.
1 wishbone screw will probably require use of saw and second looks OK.
Problem is that bottom air spring screw is seized in bushing. I already pressed, pushed, hammered and empty a bottle of WD40 but nothing wants to move.
I can use bigger hammer and tools but I will probably damage the bushing or something else.
Do I missed something? Any advice would be appreciated.
Thanks.Disco 3 SE-MY2005 manual
Lightweight SIIA
Defender 110 TD5
26th Jul 2011 9:17 pm
Gareth Site Moderator
Member Since: 07 Dec 2004
Location: Bramhall
Posts: 26744
I changed airsprings recently, and that bolt was very tight indeed. It took a large breaker bar to get the nut to move. Once the nut was off, and a bottle jack used to support the bottom of the airspring, the bolt came out easily.
You have depressurised the suspension first I presume? if not, the pressure in the spring will be clamping the bolt. Undo the the top air connection to release the pressure.
26th Jul 2011 10:51 pm
stemu
Member Since: 17 Oct 2009
Location: Alsace
Posts: 17
Thanks Gareth for your help.
I will try that!
It's like the inner parts of the bushing is rotating (some degrees) with screw that's why I thought that everything has seized.Disco 3 SE-MY2005 manual
Lightweight SIIA
Defender 110 TD5
27th Jul 2011 8:06 am
stemu
Member Since: 17 Oct 2009
Location: Alsace
Posts: 17
Hi,
Screw is definitely seized in bushing
Inner part of bushing is moving with screw when rotating it so I stopped job and will reassemble everything.
Strange that lower air spring bushing is not mentioned in parts list as the one for coil spring is available?
Maybe I shoud buy new air springs to get the bushings
Now question is: are they similar and can I put a bushing from a non-air spring shock absorber?Disco 3 SE-MY2005 manual
Lightweight SIIA
Defender 110 TD5
27th Jul 2011 11:22 am
fabioferro85
Member Since: 18 Nov 2013
Location: Bolzano
Posts: 16
Hi Stemu,
if i well understood you were working to change the following bush:
Am I right ?
did you solve the problem ? did you find the bush/silentblock? do you have the code of the part?
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum