Quote:

It is possible to override the anti-trap
mechanism when movement is
restricted by ice or dirt, by pressing and
holding the front of the switch whilst the roof
is closing.

Sunroof calibration

Under some circumstances (i.e. if the battery is
disconnected), the sunroof position may need
to be recalibrated. The sunroof position is
recalibrated as follows:

1. With the battery connected, turn the starter
switch to position ll.

2. Press and hold the front of the switch for
20 seconds. The sunroof will start to
move.

Continue to hold the switch until the
sunroof completes one full open and
closing cycle. When the sunroof stops
moving, release the switch.

The sunroof can then be operated as normal.
Note: Calibration will not function if the battery
voltage is low.