Member Since: 06 Nov 2006
Location: In the Clubhouse
Posts: 21361
there's definately the same 'floor' channel on the side rails. You may need to undo the bolts and fiddle about to get it in. will try to remember to take a pic later.Bodsys Brake Bible
There's a big sheet of aluminium over all the floor rails. Like this pic I've nicked from someone else on here:-
I'm thinking of sticking the mounts through the small bit of exposed roof, although it may mean having to remove the antenae when loading.
Anybody know what's underneath there? Any ribs to give a bit extra support?A vaccine does not stop you catching a virus, or passing it on, or getting ill from it, really ill. It does reduce the likelyhood of you dying when really, really ill. Stay Alive - KEEP AWAY FROM PEOPLE.
Isn't there a channel around the top rail that accepts captive bolts? Vertical, but if you have a Sirio with a swivel mount, all good. I know it's not considered "kind" to say no these days, but no. Just no, ok? And if it's not ok, still no.
29th Jun 2011 1:10 pm
Bodsy Site Sponsor
Member Since: 06 Nov 2006
Location: In the Clubhouse
Posts: 21361
Thanks for all the ideas chaps. This shows the type of base I'm trying to fit and why some of the ideas can't work:-
It goes onto an RLD mounting bracket fine, once the hole is reamed out to size. I wonder if I could put a right-angle bend into the bracket without damaging more than the powder coating . . . ?A vaccine does not stop you catching a virus, or passing it on, or getting ill from it, really ill. It does reduce the likelyhood of you dying when really, really ill. Stay Alive - KEEP AWAY FROM PEOPLE.
Instead of using Ray's bracket why not just drill a hole through the aluminium flooring and fit the mount into it?
That's how I had mine mounted many years ago when I had the same rackThe End
That's the best workable suggestion yet, Slimer. I looked at bolting Ray's bracket to the end of the floor but there is a cross rail right at the edge. There is already enough hassle in taking the rack on and off without having to muck about with antenna mounts as wellA vaccine does not stop you catching a virus, or passing it on, or getting ill from it, really ill. It does reduce the likelyhood of you dying when really, really ill. Stay Alive - KEEP AWAY FROM PEOPLE.
drill a hole through the aluminium flooring and fit the mount into it
Beaten by the thickness of the floor - it's a sort of honeycomb structure for strength and much thicker than the available length of mount.
I'll away and try bending Ray's mount.A vaccine does not stop you catching a virus, or passing it on, or getting ill from it, really ill. It does reduce the likelyhood of you dying when really, really ill. Stay Alive - KEEP AWAY FROM PEOPLE.
29th Jun 2011 3:02 pm
Frans@yamorna
Member Since: 20 Jan 2010
Location: Tzaneen
Posts: 109
The floor rails on my RR have slots underneath,so using a piece of aluminium flat bar bolted to them,gives you a good base for the arial.Enjoy Big Country RR,NL Split Charge,FR Sump Guard,TP Monitor,BAS map
29th Jun 2011 4:08 pm
xtc
Member Since: 27 Mar 2007
Location: Hampshire
Posts: 1072
Use a piece of 50x25mm about 50mm long ali angle from B&Q bolted to the top rail with M6 bolts slid into the top rail from the back end. The 50mm side of the angle has plenty of room for a 259 hole and is horizontal. Every G4 had one on!Off Roading is OK.... But I'd rather be Boating!
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum