ampneyman
Member Since: 01 Mar 2009
Location: Gloucestershire
Posts: 22
|
Hi Guy's, Need some help or advise..
Just had 60k service, Dealer advised that pads worn low and discs lipped, as usual they wanted both arms and a leg to replace!
Anyway, a few days later the pad warning light came on.. Today i've changed the discs, pads and sensor wire, but the light is still on (new rear brakes and sensor on the rears 3k ago) - do I need to get this put out at the dealer?
Thanks for any help
|
11th Jun 2011 10:44 pm |
|
|
wiggs
Member Since: 03 Sep 2006
Location: Manchester
Posts: 14372
|
No ... Light should go out if the sensor is fitted correctly or not shorting out G4 Gone ...but not forgotten
|
11th Jun 2011 10:47 pm |
|
|
Bodsy
Site Sponsor
Member Since: 06 Nov 2006
Location: In the Clubhouse
Posts: 21361
|
If you've changed the front sensor, double check the rear sensor. Bodsys Brake Bible
D4/D3 Remote FBH heat kits
BAS Remaps/ EGR Blank
Transmission Flush
Software updates/enabling
Clock/ SNOTM /3Flash / 4x4Info /BT Update /Service Reset/Error Codes / Gearbox Reset
See It Here
|
11th Jun 2011 10:48 pm |
|
|
ampneyman
Member Since: 01 Mar 2009
Location: Gloucestershire
Posts: 22
|
Thanks for replies.
I checked the rear sensor, just in case, all seems to be fine. Its a patern part sensor, I suppose it could be faulty. I'll plug to the old one back in tomorrow, cut the end off and join the wires, see if the light goes out..
|
11th Jun 2011 11:46 pm |
|
|
Bodsy
Site Sponsor
Member Since: 06 Nov 2006
Location: In the Clubhouse
Posts: 21361
|
Just make sure that the front connector has the small brass spring like connector in it. Have a look at the brake bible in my link below for some pics. Bodsys Brake Bible
D4/D3 Remote FBH heat kits
BAS Remaps/ EGR Blank
Transmission Flush
Software updates/enabling
Clock/ SNOTM /3Flash / 4x4Info /BT Update /Service Reset/Error Codes / Gearbox Reset
See It Here
|
12th Jun 2011 12:31 am |
|
|
ampneyman
Member Since: 01 Mar 2009
Location: Gloucestershire
Posts: 22
|
Thanks for the replies lads.
Took the front sensor off and found a pin missing from the plug New sensor fitted - no more light on
Thanks again for the help
|
21st Jun 2011 10:55 am |
|
|
Bodsy
Site Sponsor
Member Since: 06 Nov 2006
Location: In the Clubhouse
Posts: 21361
|
good stuff! Bodsys Brake Bible
D4/D3 Remote FBH heat kits
BAS Remaps/ EGR Blank
Transmission Flush
Software updates/enabling
Clock/ SNOTM /3Flash / 4x4Info /BT Update /Service Reset/Error Codes / Gearbox Reset
See It Here
|
21st Jun 2011 11:17 am |
|
|