| Home · FAQ · New Posts · My Posts · PMs · Search · Members · Members Map · Groups · Profile · Donate ·
Log In
|
- You are currently viewing DISCO3.CO.UK as a guest - Register to take part or Log In
landyman73
Member Since: 25 Aug 2010
Location: Pretoria
Posts: 12
  
|
Hi, first post - firstly want to thank Anthony from Torq Tune for all the help with my D3 - really appriciate it!  . However currently have the following major problem:
Towed a heavy trailer for 1000km no problems - day after ariving at our destination problems started as follows; Normal drive mode - after approx 3-5km when shifting up there is a jerking of the gears and revs hunt severely - seems specific to arount 4th - 6th gears. If continue driving like this - transmission failure message comes up with limited gears available "F" appears on dash. Same happens with Sports mode. If driving in Comand shift - no problems gears shift up normally no hunting of the revs, however seems after approx 50-70km that it strugles to shift between 6th , 5th and 4th - downwards especially - then also goes into TFM and limited gears available. - Any help would be appreciated 
|
 23rd Apr 2011 1:11 pm |
|
|
DiscoDunc
Member Since: 08 May 2006
Location: Bristol
Posts: 16390
  
|
may just need a double flush of gearbox.
mine started doing that when towing, seemed as if it was misfiring, but I didnt get any errors messages.
search for +double +flush  Duncan
-----------------------------------------------------
If I'd known I was going to be so thirsty this morning I'd have drunk more beer last night.
FFRR Autobiography 4.4 SDV8 MY17
D4 HSE MY13 SOLD
FFRR 3.6 Vogue TDV8 SOLD
D4 HSE MY10 SOLD
D4 SE TECH MY15 SOLD
D4 XS MY12 SOLD
D4 HSE MY10 SOLD
D3 HSE MY06 - Re-Cycled Worldwide
|
| 23rd Apr 2011 1:24 pm |
|
|
landyman73
Member Since: 25 Aug 2010
Location: Pretoria
Posts: 12
|
Hi - already had that done about 3000km ago - this is different from what I experienced before - not constant at all - also hunting is severe - jumping 1000 revs at time? - any other ideas - electronic maybe?
|
| 23rd Apr 2011 2:34 pm |
|
|
character
Member Since: 31 Dec 2007
Location: wiltshire
Posts: 5781
|
the control module (my bet) or torque converter within the gearbox, take yer pick, each as expensive as the other with the same labour charge as for inserting a complete box (which comes with torque converter and control module and gearbox and 99% filled up with the very expensive ATF, you just have to buy half a litre to top up) 
Been there, seen it done club and now sporting a new complete box
|
| 23rd Apr 2011 10:14 pm |
|
|
Baben
Member Since: 15 Feb 2006
Location: Kyalami
Posts: 2059
|
Should be able to get a control module at the scrapyard? May be worth a try. Ask clintD3- he knows a great source
|
| 24th Apr 2011 11:02 am |
|
|
landyman73
Member Since: 25 Aug 2010
Location: Pretoria
Posts: 12
|
Hi - thanks for that will certainly try on Tuesday when everyone is out of holliday mode! - one question though, will I make it back to GP, in its current state?
|
| 24th Apr 2011 1:56 pm |
|
|
Bandit1
Member Since: 05 Mar 2011
Location: Cape Town
Posts: 5
|
Landyman
Have you managed to get jour problem sorted yet??
I am experiencing the same.
New oil has been put in twice but still not fixed. No problems on the diagnostics.
Any suggestions from anyone??
Thanks
|
| 21st Jul 2011 7:20 pm |
|
|
Kabous
Member Since: 11 Jul 2007
Location: Mokopane
Posts: 233
|
Sounds like the need for a new gearbox oil filter. White MY2011 SDV6 HSE
|
| 22nd Jul 2011 5:56 am |
|
|
KOOS BEST
Member Since: 14 Feb 2010
Location: Mtunzini
Posts: 122
|
Kabous wrote:Sounds like the need for a new gearbox oil filter.
Is there a post on how to do this?
Would like to know how to.
|
| 24th Jul 2011 4:50 pm |
|
|
landyman73
Member Since: 25 Aug 2010
Location: Pretoria
Posts: 12
|
Sorry to be the bearer of bad news, but the cause of mine behaving in the way it did was a burnt lockup clutch, and subsequent debris going into the torque converter - very expensive  . However,the pain has been dulled a bit since she is now running like new after the replacement of the torque converter, and the overhaul of the gearbox
|
| 25th Jul 2011 4:07 am |
|
|
Discoeast
Member Since: 19 Feb 2008
Location: Boksburg
Posts: 800
|
Quote:Is there a post on how to do this?
Would like to know how to.
KOOS BEST
The filter is part of the gearbox oil pan, you replace the whole thing. D3 bullbar-spots-roof rack with spots-ladder-long range tank-swing out spare wheel carrier- upgraded tow bar-dash console-internal water tank-duel awnings-drawer system & T T.
|
| 25th Jul 2011 6:11 am |
|
|
landyman73
Member Since: 25 Aug 2010
Location: Pretoria
Posts: 12
|
You can get a metal pan from ZF in Edenvale (SA), which will have the filter seperately. So in theory you will be able to replace the filter in the future without having to change the whole pan.
|
| 25th Jul 2011 9:35 am |
|
|
|
Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
|
DISCO3.CO.UK Copyright © 2004-2024 Futuranet Ltd & Martin Lewis
|
|
DISCO3.CO.UK is independent and not affiliated to Land Rover.
