Member Since: 28 Jul 2005
Location: South West
Posts: 565
After reading this thread and wanting to "do stuff" myself I had a go at this.
I have a 2005 Auto SE with 64k on the clock:-
Not as bad as some of the posts here but what do you think?
Cleaner
I think I could have got it cleaner but this was my first go and I was unsure how to disconnect the sensor. I will have another go in a couple of days.regards
tony
05 "Battlestar Galactica"
In 7 years ownership
09/13 New Battery (I did that)
11/13 new alternator. (I did that)
2 x EGR Blanked. (I did that )
1st Oct 2013 3:29 pm
tony bennett
Member Since: 28 Jul 2005
Location: South West
Posts: 565
So far I have not perceived any change from doing this other than the fact that the All Fuel reading went from 21.5 before the clean to 21.7 after.
Need to do a bit of a run to see if that changes.
Can anyone advise if a "restore to factory settings" on the trip meter be a good or bad thing to do please?regards
tony
05 "Battlestar Galactica"
In 7 years ownership
09/13 New Battery (I did that)
11/13 new alternator. (I did that)
2 x EGR Blanked. (I did that )
2nd Oct 2013 11:08 am
craig_bennett
Member Since: 05 Oct 2012
Location: Bristol
Posts: 52
I cleaned mine a month ago by repeatedly soaking in de greaser and tapping gently on the bench to get the crud out from inside. I instantly noticed it was more resposive and a tank of feul later ive gained 1mpg. Ive always had a steady 26 now its a steady 27 but better still has helped reduce the kangaroo problem manuals suffer from !craig.
3rd Oct 2013 1:23 am
ShootersRest
Member Since: 20 Sep 2013
Location: Essex
Posts: 25
Evening gents
Just thought I would re ask the question as it was not answered on a previous post in this section.
Has any one done the full strip down of the induction system, to clean out the manifold, hoses, etc
I would of thought this would further increase MPG, response, etc as it did on my 300tdi.
I would of thought that given the state of some of the MAP the rest of the induction system would be just as bunged up, resulting in very little change by just cleaning the element mentioned.
My reason of thinking is this- although the MAP reads a curtain air pressure, this does not necessarily mean the combustion chambers are getting this amount if the induction system is clogged (reduced volume), as the MAP element is prior to the manifold- correct
So in theory the sensor thinks the cars getting enough air/ oxygen, but in reality it's not.
I stand by to be corrected/ educated as my thought process is that based on older engines.
If there is a write up by a member who has done the full strip down, it would be good to see and hear the results
Ref: Has any one done the full strip down of the induction system, to clean out the manifold, hoses, etc
I thought I read on here or maybe the Sport forum, that you could buy the housing (manifold) complete with the sensor cheaper than just the sensorIn Spain - 2018 F Pace - Down and out's Velar
In UK - Dare not say on this Forum
Gone - Lots of Lode Lane vehicles.
- Beta User
3rd Oct 2013 9:36 am
WillyEckerslike
Member Since: 22 Aug 2013
Location: Out in the world
Posts: 967
I read that too, Syd. I'm sure it was a post by TLO.
3rd Oct 2013 9:43 am
Robbie
Member Since: 05 Feb 2006
Location: ¯\_(ツ)_/¯
Posts: 17932
It was certainly the case a couple of years ago but with LR's elastic parts pricing Nick would need to check again. The intake is just a meccano set and easily cleaned. I took mine apart when I binned the EGR stub pipes to clean it all out. Of course, the V8 owners become quite accustomed to cleaning their intake and throttle.
The Large One wrote:
Map sensor is
1316126 £133.22
the whole air manifold with the sensor is only £115.28
LR007124
NO FIGURE
Land Rover - Turning Drivers into Mechanics Since 1948
Member Since: 22 Aug 2008
Location: Yorkshire
Posts: 3145
I cleaned mine this morning for the second time, first time was previously in this post about two years ago ?
Although I noticed a crisper pick up initially two years ago along with slightly better MPG and a better throttle response this time I noticed diddly squat !
There wasn't the carbon build up that there was before and the hole was visible where as before it was caked over.
I've been using 2T for the past 20K so maybe that's help keep it clean ?
I was looking forward to de funking it and getting a crisper pick up ?
Only dead fish go with the Flow !
5th Oct 2013 8:43 am
Disco_Mikey
Member Since: 29 May 2007
Location: Dundee, Scotland
Posts: 20786
ShootersRest wrote:
Has any one done the full strip down of the induction system, to clean out the manifold, hoses, etc
I would of thought this would further increase MPG, response, etc as it did on my 300tdi.
I would of thought that given the state of some of the MAP the rest of the induction system would be just as bunged up, resulting in very little change by just cleaning the element mentioned.
Nice idea, in theory, but the manifolds are part of the cam cover, so is a fairly major stripdown to remove. The complete oppostie to a 300TDi
In addition to that, there is also a long inlet tract through the head itself, which would be impossible to clean without the heads being removedMy D3 Build Thread
Member Since: 20 Sep 2013
Location: Essex
Posts: 25
Hi gents,
Thanks for the replies, I managed to get the landrover workshop manual (thanks to the forum), and can now see what an epic task this would be. Feel a bit silly now for asking the question
But it still leaves the fact that if the MAP sensor is so filthy, surely every thing after it must be to , which won't help MPG, Responce, etc.
After doing the 300tdi, I would hate to think what's in the tdv6, my tdi manifold was nearly closed and took a hell of a lot of scraping, scrubbing, soaking and jet washing. So I don't suppose there's any cleaners such as wyns, that would improve any thing.
I guess it's a case of suck it up, clean the MAP and that be it, FOR NOW . I've never liked the saying "if it ain't broke don't fix it", I prefer to break it so I know how to fix it next time
Thanks gents
The information is much appreciated
5th Oct 2013 9:57 am
tony bennett
Member Since: 28 Jul 2005
Location: South West
Posts: 565
chalky wrote:
I've been using 2T for the past 20K so maybe that's help keep it clean ?
:
Is that the oil in the fuel tank trick please?regards
tony
05 "Battlestar Galactica"
In 7 years ownership
09/13 New Battery (I did that)
11/13 new alternator. (I did that)
2 x EGR Blanked. (I did that )
5th Oct 2013 10:16 am
ShootersRest
Member Since: 20 Sep 2013
Location: Essex
Posts: 25
Hi tony,
Yes it is the 2 stroke oil put in the fuel tank trick.
I've only used it on the 300tdi but it worked wonders, the noise from the engine reduced drastically within 10 miles, Responce was better, and a lot of cr ap got cleared out of the fuel system and caught in the sediment filter. I had to change it 3 times in a week before it ran clear.
Bear in mind though that the 300 had only ever be poodled around, and stood for a year or there a bouts before I got it?
Not sure about more modern engines , but I remember some gents on hear trying it.
It must be (from memory) low ash full mineral oil which is usually red. You must read the label though as I think there's a green one available now also.
A point to note though, I always carry the pot with me, as the police around my area love dip testing. The slightest hint of red in the fuel and they won't take any excuses.
Others more familiar/ knowledgable will be along to point you in the right direction I'm sure
Hope this helps
5th Oct 2013 10:27 am
ShootersRest
Member Since: 20 Sep 2013
Location: Essex
Posts: 25
I forgot to mention quantities,
For my self, I used 500ml in 30 ltrs of diesel, not the best of ideas but it did what I wanted it to do.
Now I use 500ml split between 2 tank fulls of 80 ltrs diesel.
200/1 is what I have seen banded about quite a lot but again some one with more knowledge will help no doubt
5th Oct 2013 10:31 am
Disco_Mikey
Member Since: 29 May 2007
Location: Dundee, Scotland
Posts: 20786
200/1 is correct
Or 400ml per full tank in a D3
Is must be JASO FC, + Semi Synthetic. IIRC, JASO FD is Fully Synth, and does not mix very well with the diesel.
I run in it my Disco, the wifes Toyota, and my van. The van was just MOT'd a few days ago, and when I collected it, the tester commented on how clean its emissions were My D3 Build Thread
Member Since: 28 Jul 2005
Location: South West
Posts: 565
I'll do a search, I am sure someone posted the make of this oil and that tesco garages sell it.regards
tony
05 "Battlestar Galactica"
In 7 years ownership
09/13 New Battery (I did that)
11/13 new alternator. (I did that)
2 x EGR Blanked. (I did that )
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum