| Home · FAQ · New Posts · My Posts · PMs · Search · Members · Members Map · Groups · Profile · Donate ·
Log In
|
- You are currently viewing DISCO3.CO.UK as a guest - Register to take part or Log In
Ecosse
Member Since: 07 Jan 2005
Location: Grampian, Scotland
Posts: 889
|
| Remote FBH triggering alarm! |
|
On a few occasions, when using the remote FBH (these cold mornings  ) the alarm has gone off - normally after 5-10 minutes of fbh operation.
My guess is that the vent fans must start up and cause a draught through the car over the alarm movement sensors?
Anyone else had this?, and any ideas on how to check which alarm sensor was triggered (so that I can close the vent causing the draught!) or how to disable the sensors? (disarming the alarm remotely helps, but leaves the doors unlocked!, and then after a minute the doors relock passively & the alarm is reset with them!)
The ideal situation would be that the fbh should automatically deactivate the interior alarm sensors when it fires up... but this is a LR...
Thanks
|
 16th Nov 2010 11:39 am |
|
|
Ian825
Member Since: 16 Jan 2006
Location: East Yorkshire
Posts: 96
  
|
Mine used to do the same last winter, mentioned it to the dealer as a fault & advised to wait until after the enhancment program to see if it cleared the fault.
Not really given it anymore thought but used the FBH over the last week or so & it hasn't alarmed so I presume that it has cleared.
|
| 16th Nov 2010 1:04 pm |
|
|
Ecosse
Member Since: 07 Jan 2005
Location: Grampian, Scotland
Posts: 889
|
Thanks - my car was supposed to have had the enhancements applied at the start of March before delivery... wonder how I check if they were actually applied   as I am not near the supplying dealer & based on past experience have no great faith in the local dealership.
|
| 16th Nov 2010 1:19 pm |
|
|
patrickl
Member Since: 20 Jan 2010
Location: Berkshire
Posts: 16
|
I've had this too twice in the last 5 days.
Patrick
|
| 16th Nov 2010 10:23 pm |
|
|
Ecosse
Member Since: 07 Jan 2005
Location: Grampian, Scotland
Posts: 889
|
Patrick - what age is your car & do you know if the enhancement pack was applied? Mine was built Feb & hasn't visited a dealer since so may be a bit behind on any software fixes!
|
| 16th Nov 2010 10:42 pm |
|
|
patrickl
Member Since: 20 Jan 2010
Location: Berkshire
Posts: 16
|
Mine is a Dec 09 car, had all the enhancements done in March/April. But my FBH is a Bell Autos activation and then my install of the remote kit.
That said it has just had its first service and no other software updates notified. I only get the alarm trigger when I have double locked and activated the full alarm system.
Last night/this morning I single locked only and then ran the FBH remotely with no triggering - so it is clearly a double locking and additional sensitivity problem with the alarm system sensors.
Patrick
|
| 18th Nov 2010 10:02 pm |
|
|
SazzaG
Member Since: 30 Jan 2010
Location: Sussex
Posts: 106
|
Mine's just done this for the second time! I also have the FBH activated by Pete Bell, but I doubt that's relevant. It had it's first service last week and nothing was picked up.
If it's only happening on double-locking, then it must be triggering one of the internal sensors. I might try pointing all of the vents downwards and see if that helps!
|
| 1st Dec 2010 7:58 am |
|
|
SazzaG
Member Since: 30 Jan 2010
Location: Sussex
Posts: 106
|
Dammit, it did it again at 7.30 this morning! I bet the neighbours loved me for that.
Anyone else still having this problem?
|
| 12th Dec 2010 9:49 pm |
|
|
Ecosse
Member Since: 07 Jan 2005
Location: Grampian, Scotland
Posts: 889
|
I've resorted to only single locking the car at night or remotely unlocking it then single locking with the remote before then setting the FBH by its remote - seems to resolve the issue 
Clearly with the software on my car the interior sensors must remain on when the fbh starts up - the obvious solution is for the starting of the fbh to automatically switch off the interior sensors... but does anyone know if any of the software patches deal with this?
|
| 12th Dec 2010 10:07 pm |
|
|
MeanDorris
Member Since: 12 Apr 2010
Location: Herts
Posts: 132
|
Glad I found this thread, this has happened to me a good few times as well.
Had mine activated by Pete at BAS also.
No disrespect to Pete, but just wanted to confirm that someone has had the problem with a factory fitted option?
A good tip unlock and single lock but not much help if left somewhere where you want the double lock and is on timer...
Any updates on any software patches that have cured the problem?
|
| 8th Feb 2011 2:38 pm |
|
|
BBDisco3
Member Since: 23 Nov 2008
Location: Cheshire
Posts: 3646
|
I had my timer module activated on my Aug 2010 model by Pete from Bell Autos. I have had the heater fire up twice every day since before Christmas, and only once has the alarm activated.
Perhaps the direction the vents are pointing may make a difference.
Best modification I have ever had done.
|
| 8th Feb 2011 6:49 pm |
|
|
F355GTS
Member Since: 10 Nov 2008
Location: North Hampshire
Posts: 849
|
Mine has set off the alarm once but only when i used the key to lock the car rather than the button on the door handle Mark
|
| 11th Feb 2011 8:31 pm |
|
|
|
Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
|
DISCO3.CO.UK Copyright © 2004-2024 Futuranet Ltd & Martin Lewis
|
|
DISCO3.CO.UK is independent and not affiliated to Land Rover.
