stormingjock
Member Since: 25 Feb 2009
Location: Bucks
Posts: 10
 
|
| Replacement of alarm receiver unit |
|
Both my keys stopped setting the alarm and opening the doors a couple of weeks ago and I've been told my alarm receiver unit needs to be replaced (after much investigation!).
I've had a quick look myself and it looks like it simply pops out from the headling and only 1 wire needs to be disconnected to then be able to fit the new unit.
Is it that simple and I assume the keys will have to be reporgrammed to the new unit?
|
 12th Aug 2010 10:13 am |
|
|
Q86ARR
Member Since: 23 Feb 2010
Location: Jersey
Posts: 379
  
|
Keys will not need to programmed, they are programmed to the CJB.
There is a possibly that the fault lies in the green and white wire that runs between the CJB and receiver and you may need to run a new wire.
|
| 12th Aug 2010 5:25 pm |
|
|
