aaronbott
Member Since: 13 Jun 2010
Location: Sheffield
Posts: 86
|
Hi all, I am wanting to fit the front PDC. Are the sensors the same for all 4 positions or are there any differences ?
Also if anyone has a front kit with wiring then would be interested
Thanks
Aaron
|
24th Jun 2010 11:11 am |
|
|
Q86ARR
Member Since: 23 Feb 2010
Location: Jersey
Posts: 378
|
There are 2 different sensors for the front - inner and outer
|
24th Jun 2010 6:47 pm |
|
|
disco_steve
Member Since: 25 Aug 2009
Location: Are you sure this is the M5 ?
Posts: 1498
|
Q86ARR wrote:There are 2 different sensors for the front - inner and outer
Sorry, this is incorrect, the actual sensors are all identical, the control module (which is mounted behind the nearside rear side panel in the boot) has 3 plug connector ports, 1 for connection to the vehicle systems, 1 for the rear sensors and the 3rd for the front sensors.
The module determins which sensor(s) are giving a signal and calculates the distance (and hence the frequency of the tone) to give audible distance 'bleeps'
In theory to add front sensors you need four sensors + the plastic holders and the relevent wirng loom
The wiring diagram is here http://www.disco3.co.uk/gallery/albums/userpics/17007/413-13.pdf Never get mad - get even !!
06 D3 now gone to family member and still going strong at 265k
previous vehicles:
04 D2 TD5 - (clocked 189k from new)
52 X-Trail 2.2 SVE
various euro boxes !
|
24th Jun 2010 9:56 pm |
|
|