DISCO3.CO.UK - View topic - AUTOGEARBOX SELECTION LIGHTS

Advertise on DISCO3.CO.UK

Forum · Gallery · Wiki · Shop · Sponsors

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Members Map · Groups · Profile · Donate · Log In

DISCO3.CO.UK > General

AUTOGEARBOX SELECTION LIGHTS

Page 1 of 1

jonp

Member Since: 09 Jan 2010
Location: BARNARD CASTLE , Co Durham
Posts: 98

2016 Discovery 4 3.0 SDV6 Landmark LE Auto Yulong White

AUTOGEARBOX SELECTION LIGHTS

Hi . I have a four year old Disco 3 TDV6 SE and I am not sure If I have a problem with the selector position lights on the Auto gear box console . When I am in Drive D the Neutral N is also illuminated . The same as when I apply Park P the N is also illuminaited. BUT When I change into Reverse R only the R remians illuminated and when I change over to Command shift the N remains illuminated but the D goes out . It does not make any difference how many times I change the position the N is illuminated when I am not in N . Any ideas? Is this a problem with the selector console or the main gear box setection of gears ? . Thanks Jonathan

5th Jul 2010 12:06 pm

Bodsy
Site Sponsor

Member Since: 06 Nov 2006
Location: In the Clubhouse
Posts: 21361

2007 Discovery 3 TDV6 HSE Auto Java Black

Sounds like yoiu either need to adjust and lubricate the selector cable or yoiu just need to run through the re-calibration of the gears.

Find a nice clear, very long road, go into Command shift and drive changing the gears all the way up to 6th gear as you go.

Or something like that anyway

Bodsys Brake Bible

D4/D3 Remote FBH heat kits
BAS Remaps/ EGR Blank
Transmission Flush
Software updates/enabling

Clock/ SNOTM /3Flash / 4x4Info /BT Update /Service Reset/Error Codes / Gearbox Reset
See It Here

5th Jul 2010 12:41 pm

Bodsy
Site Sponsor

Member Since: 06 Nov 2006
Location: In the Clubhouse
Posts: 21361

10forcash wrote:
Start in reverse then each forward gear, hold each gear with foot fully off the clutch until the gear indication shows the selected gear, this must all be done in one ignition cycle. Once complete turn ignition off and remove key until the radio clock & park brake indicator go off.

5th Jul 2010 12:45 pm

Bodsy
Site Sponsor

Member Since: 06 Nov 2006
Location: In the Clubhouse
Posts: 21361

Put it in low range to make it easier

(oh and no clutch of course on yours...) Bodsys Brake Bible

D4/D3 Remote FBH heat kits
BAS Remaps/ EGR Blank
Transmission Flush
Software updates/enabling

Clock/ SNOTM /3Flash / 4x4Info /BT Update /Service Reset/Error Codes / Gearbox Reset
See It Here

5th Jul 2010 12:46 pm

jonp

Member Since: 09 Jan 2010
Location: BARNARD CASTLE , Co Durham
Posts: 98

Thanks for the info I will give it a go . Regards Jonathan

6th Jul 2010 9:01 am

Page 1 of 1

Jump to:

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum

Quote Reply

DISCO3.CO.UK is independent and not affiliated to Land Rover.