Advertise on DISCO3.CO.UK
Forum · Gallery · Wiki · Shop · Sponsors
  Home · FAQ · New Posts · My Posts · PMs · Search · Members · Members Map · Groups · Profile · Donate · Register · Log In  
DISCO3.CO.UK > Maintenance & Mods (D4)

Dual Battery and "Intelligent Alternator"
Post Reply  Down to end
Page 2 of 2 <12
GraemeS
 


Member Since: 17 Mar 2008
Location: NSW
Posts: 706

Australia 2010 Discovery 4 3.0 TDV6 SE Auto Nara BronzeDiscovery 4

drivesafe wrote:
As far as Jump Starting goes, if you have the auxiliary battery installed under the bonnet, all you need to jump start is a single jumper lead, connected between the positive terminals of both batteries.

with the proviso that the 2nd battery has its own high current capacity earth cable, not just a low current charging negative cable.  
Post #6993583rd Oct 2010 7:25 am
View user's profile Send private message View poster's gallery Reply with quote
PSC
 


Member Since: 01 May 2006
Location: Johannesburg
Posts: 255

South Africa 2010 Discovery 4 5.0 V8 HSE Auto Fuji WhiteDiscovery 4

drivesafe wrote:
I can see many problems for people trying to charge their auxiliary/house batteries when these vehicles operate with voltages as low as 12.2v.


Thanks drivesafe,

Would a DC to DC converter not also be a requirement ?  
Post #6993593rd Oct 2010 7:29 am
View user's profile Send private message View poster's gallery Reply with quote
drivesafe
 


Member Since: 23 Feb 2006
Location: Gold Coast, Australia
Posts: 867

Australia 

GraemeS wrote:
drivesafe wrote:
As far as Jump Starting goes, if you have the auxiliary battery installed under the bonnet, all you need to jump start is a single jumper lead, connected between the positive terminals of both batteries.

with the proviso that the 2nd battery has its own high current capacity earth cable, not just a low current charging negative cable.


Hi GraemeS, my D3 kits, these are all intended to have the auxiliary battery in the auxiliary battery compartment, are supplied with a suitably heavy duty earth/neg cable for earthing the auxiliary battery to the d3’s earth stud.

The kits fit the same way in a D4 when the auxiliary battery is fitted in the same compartment. 2008 TDV8 RR Lux + 2009 D4 2.7  
Post #6993983rd Oct 2010 10:40 am
View user's profile Send private message View poster's gallery Reply with quote
drivesafe
 


Member Since: 23 Feb 2006
Location: Gold Coast, Australia
Posts: 867

Australia 

PSC wrote:
drivesafe wrote:
I can see many problems for people trying to charge their auxiliary/house batteries when these vehicles operate with voltages as low as 12.2v.


Thanks drivesafe,

Would a DC to DC converter not also be a requirement ?


Hi PSC, like other brands of isolators, DC-DC converters have a cut-out voltage level of around 12.7v so they too would be continually cutting in and out and I’m not sure this would be a good thing for these types of devices, but even if they can handle the continuos on and off cycling, they are only good for charging one battery at a time and even then they would not be on long enough to be of any real use if the auxiliary battery was in a low state.

Whereas, the SC80-LR, even when the D4's voltage was low, would be continuously charging any number of auxiliary/house batteries. 2008 TDV8 RR Lux + 2009 D4 2.7  
Post #6994013rd Oct 2010 10:47 am
View user's profile Send private message View poster's gallery Post Reply
Display posts from the last:  
Post Reply Back to top
Page 2 of 2 <12
Jump to:  
< Previous Topic | Next Topic >


Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



DISCO3.CO.UK Copyright © 2004-2024 Futuranet Ltd & Martin Lewis
DISCO3.CO.UK RSS Feed - All Forums
DISCO3.CO.UK is independent and not affiliated to Land Rover.
Switch to Mobile Site