Member Since: 03 Jul 2011
Location: norwich, norfolk
Posts: 9
hi their new to this ,
got a d3 3 months ago allways had discos before no probs b4.
[b]eps does not work in auto mode or parking sensors, or gear lcd display.
can anyone help before i take to dealer.
cheers joe
3rd Jul 2011 11:01 pm
KevG
Member Since: 27 Mar 2011
Location: Gtr Manchester
Posts: 106
Member Since: 12 Sep 2012
Location: coventry
Posts: 24
How do I read fault codes?
Hi,I have a fault with my D3 but don't no how to get any fault code,thanks Ian
30th Dec 2012 8:53 am
Albert0109
Member Since: 15 Aug 2012
Location: Sunny Essex
Posts: 404
You need a fault code reader to plug into your obd socket eg faultmate, msv2 by black box solutions, these are an example as there are other diagnostic devices out there Faultmate Owner
New front lower wishbone bushes and balljoints
New suspension compressor with two new front height sensors
Clock on dash plus 3 flash indicators
New Exide 017 battery
EGR,s blanked
Front and rear belts replaced by Me
Including new idlers, water pump and serpentine belt tensioner
30th Dec 2012 10:10 am
Twicknix
Member Since: 28 Dec 2013
Location: Birmingham
Posts: 2
long list of error codes after auto transmission box repair
I was given this list of codes - can anyone tell me which is urgent and need fixing? That long list did not fill me with confidence!
Engine -
PO405 or was it PO40s - EGR sensor A Circuit low
P0578 - Speed Control multi function input A circuit is stuck
Body Control -
BIB02 - Low frequency coil
BIB70 - Local in connection network BIS circuit 2
BIBA0 - suspensions starting activity
BIC45 - Front windshield wiper park position switch
BIC57 - Passive starting relay current coil
U0155 - Lost comms with instrument cluster module
Hi,
My 05 D3 has started a new quirk!
When driving mainly under large throttle openings, u lose throttle, engine doesn't stall it just starts to slow down. Had codes read n we have PO2299 brake and throttle position implusability.
But wot I don't no is if I need a throttle pedal or a brake switch?
Any1 else ever had this issue b4 ??'55' D3 TDV6 HSE
'78' SIII lightwight
Which way up??
5th Jun 2014 8:00 pm
Erikhil
Member Since: 26 Nov 2015
Location: Ålesund
Posts: 8
Hi all, I am new here, and a very happy first time LR owner.
My discovery 3 just had a transmission flush when I bought it. But everytime I park the car, I get "Transmission Fault" in my display ???
Can anyone please help ?
Regards
Erik
juvet.com
26th Nov 2015 12:52 pm
Divvi0
Member Since: 06 May 2017
Location: Redcar
Posts: 1
Cylinder head fault codes
Hi,
I was driving home from work last week when the engine started making a loud knocking noise coming from the top of the engine. I have had the car to a local 4x4 garage and they were uncertain about the fault. But they gave me the following fault codes:
P2290 Injector Control Pressure to low
P02A7 Cylinder 4 Balance Trim at min level
P02A2 Cylinder 3 Balance Trim at max level
P029B Cylinder 1 Balance trim at min level
P121A Cylinder Balance Injector Restricted
Has anyone had these codes before and know how to remedy the fault on the engine?
I have been reading up on the hydraulic tappets at the top of the engine and apparently their is a common fault with the cam shafts on the D3 2.7ltr engine. Does this sound like this could be the fault in my situation?
Thanks
6th May 2017 6:27 pm
rogerq
Member Since: 11 Nov 2016
Location: oxfordshire
Posts: 2
I have just had new EGR valves fitted which has stopped the engine sign coming on but I now have a message on saying 'engine system failure', anyone now the cause and how to correct.
28th Jun 2017 11:51 am
Spook
Member Since: 22 Feb 2021
Location: Ashtead
Posts: 10
Transfer box stuck in neutral
Hi Guy’s, desperate for some help.
I have a manual 2008 discovery 3. Bought another tccm because mine was fried. I’ve had the local Indy re code the new tccm but I now have no drive. The green low range light is flashing on the dash. I imagine its stuck in the middle between HR & LR. I tried doing a manual calibration but had no joy, no sounds or anything. I cleared all the fault codes and read the remaining codes for the transfer case as per the picture. Any help would be greatly appreciated.My Rescue vehicle is a Hilux 🤪
22nd Apr 2021 4:41 pm
Lloyde81
Member Since: 13 Sep 2021
Location: Birmingham
Posts: 1
P1621 immobiliser
Hi all can someone help please my keys have suddenly stopped working for no reason the car had been parked up without issues as I’d been in and out the car then I went to move it after 2 days and it wouldn’t unlock ive had someone out and it’s came up with error p1621 immobiliser temporarily out of sync any ideas how to fix this please
Cheers paul
13th Sep 2021 9:30 pm
Alfafox
Member Since: 30 Nov 2021
Location: Beziers
Posts: 3
Hi everybody...!
I Have Disco3 2.7 TDV6 2006.
My idle is unstable and I have this DTC code:
B1202-28 = permanent statut - basse fréquence coil
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum