| Home · FAQ · New Posts · My Posts · PMs · Search · Members · Members Map · Groups · Profile · Donate ·
Log In
|
- You are currently viewing DISCO3.CO.UK as a guest - Register to take part or Log In
airhog
Member Since: 12 Sep 2008
Location: South
Posts: 16
|
Firstly hello, just bought a D3 and am as pleased as punch with it.
Been searching the archives about fitting a bluetooth kit and am having problems.....
I need to get power for the nokia kit and read about taking it off the back of the lighter socket, sounds good..
Spent the last couple of hours tearing the car apart and cant see for the life of me how you can tap these without taking the acc/ashtray panel out?? There just doesnt seem to be any access.
I have had the facia out and pulled the acc/ashtray panel out of it's clips to the point where it was about to break, but still cant find the room I would need. Bit of a pain as I just uninstalled the kit out of my old BMW, which reminded me just how easy it all was in that car!!
Any thoughts very welcome
|
 20th Oct 2008 3:42 pm |
|
|
Wex
Member Since: 16 Apr 2007
Location: Knackeragua
Posts: 5173
  
|
The guy who fitted mine powered it off the back of the radio. ( It was fitted before it was delivered to me)Dont know if it was a good ideabut I havent had any problems.
The ashtray does come out fully . You have to remove the gear surround which alows the plastic piece below the ashtray to come out ( this piece is lipped or rebated under the gear surround) in turn releasing the ashtray.
|
| 20th Oct 2008 3:48 pm |
|
|
mobyone
Member Since: 23 Dec 2005
Location: Melbourne
Posts: 394
|
There's probably just enough room to grab the 12v feed to the cig lighter if you remove the ALL the panels above the ashtray. But as others have stated, you can get 12V feed from the back of the radio unit.... What's the point.... it all comes out in the wash anyway!
85 Range Rover
01 Disco Series II
05 D3 V6SE, Bonatti Grey, 19"alloys
|
| 21st Oct 2008 1:16 am |
|
|
Gazellio
Member Since: 08 Jan 2011
Location: Chilterns
Posts: 4130
 
|
Hi, Does the panel around the centre dash (RADIO & AIR CON ETC) just pull off iff you tug it hard enough?
|
| 25th Jan 2011 10:31 am |
|
|
NickJ
Member Since: 11 Oct 2010
Location: there's no f in point
Posts: 2137
|
The H shaped bit? Yes, just pull it towards you ('into' the car). It's 'hinged' at the top above the vents so you need to start pulling out at the bottom first, then working upwards. There's only four clips, two on each side (the type where the metal flies off nver to be found again, but heard rattling annoyingly).
|
| 25th Jan 2011 7:16 pm |
|
|
Gazellio
Member Since: 08 Jan 2011
Location: Chilterns
Posts: 4130
|
Yes did it earlier and it came off quite easily but I lost a middle clip but this did not effect putting it back. Thanks 
|
| 25th Jan 2011 7:20 pm |
|
|
elpiloto
Member Since: 19 May 2010
Location: Dubai
Posts: 39
 
|
| WHAT YOU NEEEEEED TO KNOW TO DO THIS!!!!!!! |
|
To get to the point of removing the ashtray use this step by step guide:
NOTE GOT AS FAR AS ATTEMPTING TO PULL OUT THE ASH TRAY/CIG UNIT, BUT COULDN'T FREE IT!!! If anyone can suggest something I haven't tried please let me know!!!
1: Take the gear knob off by strongly pulling up. Careful it takes a lot of force, but will pop off. NOTE: must be done in Park position.
2: Remove the cup holder inserts and coin tray.
3: Unscrew screw which is just in front of Electric Park Brake.
4: Pull, carefully, but bloody firmly on the central panel. Best hold where cup holders are. I will eventually pop up bit by bit and work your way backwards breaking on of the clips. Note, no damage happens here and Land Rover's method WILL DO A LOT OF DAMAGE. Bloody idiots don't know how to pull apart their own car!!!
5: Disconnect the 3 electric cables and place central panel somewhere soft and safe... duh! I know!
6: Remove plastic that forms put of the coin tray base. Note this is not fixed and comes out easily.
7: Remove plastic which lines the Ash tray/Air Cond/Radio/Video Display by pulling firmly from the bottom up. NOTE: There are four clips and I pretty much grantee that you will bust at least one of the four clips. BUT, it clipped back on firmly when replaced.
8: Unscrew the 4 screws holding the Air conditioning Panel and pullout. Disconnect the electrical connections in the back of the panel.
9: unscrew the two screws for the ash tray and from here I have no bloody idea. I tried the pull while applying pressure to the top of the ash tray, but it wasn't going anywhere. Even tried releasing the two clips either side with flat head screw drivers. No joy, gave up after 2 hours.
|
| 6th Feb 2011 3:48 pm |
|
|
Caltrigger
Member Since: 07 Jun 2012
Location: South Africa
Posts: 9
 
|
I have been reading your post and may need your help.
I have successfully removed the H panel and climate control unit, on a seperate occasion I have removed and replace the whole black section of consol between the dash and the cubby between the seats(caoting was peeling off the plastic)... I am trying to get to the wires for the Aux power jack and did so by finding the wires above the ashtray facia...problem is as I was fiddling a small pin fell out my ash tray cover/flap and now that darn thing won't stay cloased... So, now I need to remove that ash tray facia and try fiind where that pin goes in order to fix the darn thing!!
Once the H panel is out and the consol between the seat then where do I lossen or unclip??
Really irritated as I as all the way there without breaking anything... "If you want to go fast, go alone...If you want to go far...Go together!"
|
| 3rd Jul 2012 4:25 pm |
|
|
|
Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
|
DISCO3.CO.UK Copyright © 2004-2024 Futuranet Ltd & Martin Lewis
|
|
DISCO3.CO.UK is independent and not affiliated to Land Rover.
