Member Since: 31 May 2006
Location: Bogota
Posts: 2
Brush Bar Incompatible with Front Park Distance Control?
Is it true that the metal brush bar is not compatible with the Front Park Distance Control? I recently bought a Disco 3, and when I had the dealer install the Brush Bar I was told that the PDC had to be disconnected, otherwise it would constantly beep?
Can anybody help with this issue?
Thanks[/b]Bogota Disco3
Sorry, I can't answer your question, but someone will come along who can!Have a nice day!
2010 Cayenne Diesel with PASM & Off Road Pkg
2005 HSE D3 (Sold)
1st Jun 2006 2:10 am
Martin Site Admin and Owner
Member Since: 06 Nov 2004
Location: Hook Norton
Posts: 18452
10forcash is the person to sort this for you, I'm sure he'll be on later to help
1st Jun 2006 10:40 am
10forcash
Member Since: 09 Jun 2005
Location: Ubique
Posts: 16534
The dealer is correct - but only on the centre sensors, the outboard ones on mine still work perfectly.
There are a couple of options, either disable the centre sensors only or reposition them so that they don't 'ping' the bar. repositioning is only really an option if you are fitting a winch as well, otherwise you'll have holes in the bumper cover.
If you want to disable the centre sensors, I found the best way to do this is to cover the front of the sensor in butyl rubber tape, and then either paint or cover with matching colour tape.
If you look in my gallery there are photo's with this done but note that where I have repositioned the sensors to only clears the winch mount, they need to go further out to clear the brush bar.... hence the tape
1st Jun 2006 11:31 am
meissner
Member Since: 31 May 2006
Location: Bogota
Posts: 2
Thanks for the info
I will tell the dealer to do as you suggest. Thanks a lot.Bogota Disco3
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
