| Home · FAQ · New Posts · My Posts · PMs · Search · Members · Members Map · Groups · Profile · Donate ·
Log In
|
- You are currently viewing DISCO3.CO.UK as a guest - Register to take part or Log In
stevo
Member Since: 25 Apr 2006
Location: north queensland
Posts: 107
  
|
Guys i acknowledge the a site sponsor is working hard on the D4 remap. However there are available some plug in remapping devices that alledgedly provide 20% more power and 600 - 700nm torque. Has anyoner tried these. Do they work? Disco 4 Sept 09
|
 26th Jan 2010 6:37 am |
|
|
disco4x4au
Member Since: 19 Jan 2006
Location: Perth
Posts: 409
|
I'm about to - let you know next month 
Cheers,
Gordon ex - 2006 D3 TDV6 SE, silver, with lots of stuff - R.I.P.
ex - 2009 D3 TDV6 SE, silver, had lots of stuff too!
Now - 2010 RRS 3.0 TDV6, rimini red, 18" rims + Cooper LTZ, rear eLocker, Spider tuning box, GOE protection plates and rock sliders, GOE 3way shortened rods.
|
| 26th Jan 2010 6:47 am |
|
|
bellautos
Member Since: 02 Feb 2006
Location: NorthYorkshire
Posts: 2532
 
|
Even though ive done the remap for the D4 id be still interested in the results you get from a tuning box.
Pete
|
| 26th Jan 2010 10:14 pm |
|
|
heine
Member Since: 07 Feb 2007
Location: Midrand
Posts: 4054
 
|
20 % more power from any form remap sounds a bit ambitious to me ?
|
| 27th Jan 2010 12:53 pm |
|
|
carcollector
Member Since: 22 Jan 2010
Location: @ home
Posts: 75
|
Unnecessary quote removed
not really imho
|
| 27th Jan 2010 12:57 pm |
|
|
MartinR
Member Since: 27 Jan 2008
Location: Oxon
Posts: 708
|
I thought most of the remaps offered around 30% boost in both as a starting point, bringing the 2.7 in line with the stock 3.0, so 20% sounds reasonable depending on what you want from it. But given the 3.0l D4 leaves the factory with 600Nm on the spec sheet, I wonder if this chip might be for the 2.7 anyway?
If you did get a 30% boost on the 3.0l I do wonder how long the transmission will last with 780Nm running through it... Pete, can you comment?!
Martin
|
| 27th Jan 2010 1:31 pm |
|
|
bellautos
Member Since: 02 Feb 2006
Location: NorthYorkshire
Posts: 2532
|
What i can say is i recon 780nm will probably cause major problems in the box, the tested working safe limits are less than that, and some of the components are manafactured with less than that in mind also.
20% peak sounds more resonable than 30% but thats still an optermistic 120Nm from a plug in box. Tbh its hard to say what it will do, there are many ways to produce a plug in kit so it depends on how they have done it.
I recon it will be a common rail box which i personaly think may struggle to give a 20% gain but who knows untill its tested.
I calculate my 2.7 mapping to give a peak of 20% increase in torque and bhp, see below the figures i always quote of this engine.
2.7L std 190/100x20+190=228- the std190=38bhp
2.7L std torque 440/100x20+440=528- the std440=88Nm
Pete
|
| 27th Jan 2010 10:46 pm |
|
|
stevo
Member Since: 25 Apr 2006
Location: north queensland
Posts: 107
|
Just a thought on the gear box. The 3.0 TDV6 has the same box as the TDV8 and the supercharged 5.0. So one would think that it should take a bit more power as both these engines have larger outputs in Torque and KW respectively.
Also any remapping done by any company will need to increase the power so as to be useful, otherwise why would you bother? Disco 4 Sept 09
|
| 5th Feb 2010 2:02 am |
|
|
StornowaySA
Member Since: 23 Sep 2007
Location: Adelaide
Posts: 406
|
I dont think either the new s/charged 5 litre or the TDV8 put out more than about 630nm do they? MY2010 D4 HSE 3.0, e-diff, 19inch MTR's; LLAMS Height adjustor, LR f & r light guards, LR side steps, LR bright finish side door mouldings; LR/Mantec G4 front bash plate, LR G4 Winch kit, Warn 9500lb Winch; GOE compressor guard, Uniden UHF, LR bright finish roof rails, LR G4 driving light kit, LR G4 ladder, 4 x extra rear compartment 12V sockets, Traxide dual battery system and Optima Yellowtop battery, ORS drawer system / fridge slide, LED rear compartment lighting.
|
| 5th Feb 2010 6:48 am |
|
|
stevo
Member Since: 25 Apr 2006
Location: north queensland
Posts: 107
|
You are correct, and no one has said that a chip will give over 700nm torque. 20% was bandied around but that just gets around 720nm not 780. The last chip upgrade gave our 2.7 15% more torque, so seeing this engine is the same basic motor just bored out to 3L , and doing the same calculation we could expect 690nm. Disco 4 Sept 09
|
| 5th Feb 2010 11:56 am |
|
|
|
Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
|
DISCO3.CO.UK Copyright © 2004-2024 Futuranet Ltd & Martin Lewis
|
|
DISCO3.CO.UK is independent and not affiliated to Land Rover.
